Home > Stone Care Products >

Aqua Mix Sealer's Choice Gold Sealer
Aqua Mix Sealer's Choice Gold Sealer - Pint, Quart, Gallon, 5 Gallon- StoneTooling.com.
Aqua Mix Sealer's
Choice Gold


 
Price: $19.03


Product Code: 95-00415


Size*:
Pint
Quart [Add $13.67]
Gallon w/ FREE Sealer Applicator [Add $76.97]
5 Gallon [Add $387.22]

Qty:  
Description
 

Aqua Mix Sealer's Choice Gold Sealer


Confused by Sealers? Take a look here: Sealer Buying Guide

Aqua Mix Sealer's Choice Gold Sealer (formerly Aqua Mix Sealer's Choice 15 Gold) is the professional's choice for a premium penetrating sealer for stone, tile and grout. Its safe, water-based formula provides a no sheen natural look while offering maximum stain protection.

Aqua Mix Sealer's Choice Gold works by penetrating into the pores of the stone or tile and leaving behind polymers that will help to repel both water-based and oil-based liquids to help protect against staining. Sealer's Choice Gold is excellent as a premium floor sealer, sealing kitchen and bathroom surfaces, and other applications where maximum stain protection is needed.

Ideal for natural stone such as marble, granite, slate, travertine, and limestone, porcelain, quarry, saltillo, terra cotta, cement pavers, masonry surfaces, and other porous tile. Aqua Mix Sealer's Choice Gold sealer is great for interior and exterior applications.


Coverage:

Coverage is approximately 300 to 1,500 sq. ft.per coat per gallon, depending on type of stone, tile, porosity and texture of surface, temperature, humidity, and method of application.


Application:

1) Read entire label before using before Aqua Mix Sealer's Choice Gold sealer.

2) For new installations, sealer can be applied as soon as 48 hours after grouting.

3) Surface must be clean, dry, and free of existing sealers or coatings.

4) Apply using a sponge, brush, paint pad, cotton towel, or sprayer. NOTE: Be sure any sealer that does not penetrate surface is removed from surface within 5 minutes of each application using absorbent paper or cotton towels.

5) If 2 or more coats are applied, allow a minimum of 30 minutes drying time between coats.

6) 2 hours after final coat conduct a test to determine if surface is completely sealed by applying water droplets to the surface. If water is absorbed, apply an additional coat. Wait 2 hours and repeat the test.

7) Ready for surface traffic in 2 hours after final coat. Keep area dry for 12 hours. Achieves a full cure in 24 hours.

8) Clean applicator tools with water after each use.


Pre-Grouting Application:

Apply over clean stone or tile a minimum of 2 hours prior to grouting, follow Aqua Mix Sealer's Choice Gold sealer application procedures above.


Aqua Mix Sealer's Choice Gold Technical Data Sheet

Aqua Mix Sealer's Choice Gold Safety Data Sheet

Average Customer Review: 5 of 5 Total Reviews: 3 Write a review.


  0 of 0 people found the following review helpful:
 
Aqua Mix Gold Sealer November 9, 2015
Reviewer: AC Tile from Anacortes, WA United States  
On par with Stonetech Bulletproof , high quality sealer, can't go wrong.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Aqua Mix Sealant May 4, 2015
Reviewer: Norman George from Waynesburg, PA United States  
The product meets my needs for the commercial applications I perform.My customers are well satisfied, and this is how I expand and maintain my clientele.

Was this review helpful to you?

  0 of 1 people found the following review helpful:
 
Sealers chioce gold September 3, 2013
Reviewer: Robert Allatto from Irvine, CA United States  
Great delivery time and packaging

Was this review helpful to you?


Browse for more products in the same category as this item:

Stone Care Products
Stone Care Products > Sealers
Stone Care Products > Sealers > Aqua Mix
Aqua Mix
Aqua Mix > Sealers
Aqua Mix > Sealers > Sealer's Choice Gold