Home > Miracle Sealants > Sealers >

Miracle Sealants Grout Shield, 70 oz.
Miracle Sealants Grout Shield Plus, 70 oz.

Price: $39.98

Product Code: 30.00062


Miracle Sealants Grout Shield

Thanks to this new technology, contractor's and DIYers can save time and money since Miracle Grout Shield takes care of sealing and protecting itself, eliminating the normal wait for grout to dry. All this for only pennies per square foot.

Miracle Grout Shield is a specialty sealer additive, made to replace water in mixtures with cement-based grout. By taking inconsistent tap water out of the equation, Miracle Grout Shield is able to create a consistent and more durable product with superior color quality. It is anti-microbial—a fungistatic agent has been incorporated into this product that will make the grout more resistant to staining caused by mildew.


Use with 25lb. bag of sanded grout.

Shake well before using. Pour entire Grout Shield contents into a clean mixing bucket. Slowly add entire bag of sanded grout and thoroughly mix (drill, grout mixing bit & bucket). Let sit in mixing bucket for 10 minutes and then mix again. Follow grout manufacturer’s instructions to install grout. In order to maintain color consistency across an entire installation, use the same liquid to grout proportions when using multiple containers for the same job.

Inspect and rework grout joints if necessary during final cleaning (between 45 - 60 minutes).

Note: Some tile professionals may desire a particular grout consistency. In this case, once the recommended Grout Shield has been used, up to 2 ounces of clean cool water can be added at a time until the desired consistency is achieved.

For interior and exterior use.

Special Notes:

When using Grout Shield stain resistant grout additive, grout doesn't need to be sealed. If tile or stone needs to be sealed, do so before grouting with Miracle Sealants 511 Impregnator or Superseal (compatible with Grout Shield ) as your grout release. Avoid applying sealer to tile/stone edges as this may interfere with proper grout bond. If enhancing tile and/or grout, use Miracles Sealants Seal & Enhance as your grout release. Do not use Grout Shield additive with cement grouts that already claim stain resistance, or with liquid, ready-to-use or epoxy grouts. Certain tile surfaces, including glazed ceramic tile, marble, stone and agglomerate tile can be scratched, stained or damaged when grouted with sanded/colored grout. Follow tile manufacturer/fabricator recommendations and test a small area prior to use to determine suitability. Not recommended for installations where chemical resistance is required. Never mix Grout Shield additive with latex additive or any other additives.

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

Miracle Sealants > Sealers
Setting Materials > Grout, Epoxy & Additives
Stone Care Products
Stone Care Products > Sealers
Stone Care Products > Sealers > Miracle Sealants
Miracle Sealants > Sealers > Grout Shield
Setting Materials
Miracle Sealants