StoneTech Heavy Duty Grout Sealer

StoneTech Professional
$16.87 - $56.38
(2 reviews)
Current Stock:
Adding to cart… The item has been added

StoneTech Heavy Duty Grout Sealer

Now with Microban antimicrobial technology! STONETECH Heavy Duty Grout Sealer is a water-based penetrating grout sealer that offers advanced stain and antimicrobial product protection on grout surfaces. Designed to keep grout looking newer longer, it protects against oil and water-based stains and inhibits the continuous growth of bacteria, mold and mildew.

STONETECH Heavy Duty Grout Sealer is a natural look water-based grout sealer that does not alter the appearance of the grout. A safer professional grade solution for you and the environment when compared to high VOC solvent-based sealers. Use this grout sealer to inhibit growth of mold on grout. Great for use on sanded and non-sanded cement based grouts with natural stone, tile, and masonry surfaces in interior and exterior applications. Comes with a 25-year satisfaction guarantee.

Features and Benefits:

  • Heavy duty protection against most stains
  • Protects grout & makes cleaning easier
  • Natural look
  • Water-based, low-solids coating
  • Interior & exterior

 

Where to Use:

StoneTech Grout Sealer is ideal for use on grout for natural stone, ceramic, and porcelain tile.

Expected Wear:

3-5 years on interior surfaces & 1-3 years on exterior surfaces.

Directions:

Note: Directions may vary depending on size. Always test in a small inconspicuous area with a 24-hour cure time to determine ease of application and desired results. Allow new grout installations to cure for a minimum of 72 hours prior to application. Make sure surface is clean, dry and free of waxes and coatings. Ensure that the surface temperature of the stone is between 50-80°F before sealing.

1. Mask off and protect any baseboards or adjacent areas to avoid splashing and overspray onto surfaces not intended to be treated.

2. Liberally apply using a paint pad, low-pressure chemical-resistant sprayer, narrow roller or natural hairbrush, focusing on the grout joints.

3. Allow StoneTech Grout Sealer to completely penetrate into the grout, 5-15 minutes.

4. Liberally apply a second coat following steps 2-3.

5. Wipe up all sealer from the surface of the tile. Use a clean, dry, lint-free, cotton towel or mop to remove excess sealer.

6. If StoneTech Grout Sealer was not completely wiped off and a residue appears, wipe entire surface with a towel dampened with sealer. Use a white nylon pad to loosen residue and follow with a clean, white absorbent towel to remove.

7. A full cure is achieved after 24-48 hours; foot traffic may begin in 4 hours. Cover with red rosin paper, if foot traffic must resume before the recommended time periods have passed.

8. Clean equipment with water.


Available Sizes (and Coverage):

  • 24oz Spray bottle: 100-200 sq. ft.
  • Quart: 150-250 sq. ft.
  • Gallon: 600-1,000 sq. ft.


StoneTech Heavy Duty Grout Sealer Technical Data Sheet

StoneTech Heavy Duty Grout Sealer Safety Data Sheet

30.92000:
ST306-0624
30.93000:
ST606-0632
30.90000:
ST306-0401

Reviews

  • 5
    Great

    Posted by Debre Tally

    Love this product!

  • 5
    Grout Sealer

    Posted by Ann Marie

    A quality sealer.