Home > Floor Restoration >

DISCONTINUED - StoneTech Professional Polishing Powder
StoneTech Professional Polishing Powder


 
Alternative Views:


Price: $39.37

Product Code: 30-35500


Size*:
1.5 LB

Qty:  
Description
 

StoneTech Polishing Powder


NOTE: StoneTech Professional is now distributed by Laticrete International. Same great Dupont formula, but now with a Laticrete Label.


StoneTech Professional Polishing Powder is a non-acidic, marble euro polishing powder that removes light scratches, mild acid etching & light wear patterns. StoneTech Polishing Powder creates a smooth, satin finish on natural stone such as marble, limestone, travertine & terrazzo. (For professional use only.)


Features and Benefits:

  • Creates smooth, satin finish
  • Eliminates etch marks & light wear patterns
  • Non-acidic

Available Sizes and Coverage:

Available in 1.5 LB and 10 LB Containers

Coverage: 500 - 1,000 sq. ft. per pound


Directions:

Always test in a small inconspicuous area to determine ease of application and desired results. Allow new grout installations to cure for a minimum of 72 hours prior to application. Make sure surface is clean, dry and free of waxes and coatings.

1. If surface is heavily soiled, pre-clean with StoneTech KlenzAll Cleaner if needed.

2. Mask off and protect any baseboards or adjacent areas to avoid splashing and over-spray onto surfaces not intended to be treated.

3. If using Polishing Powder following the use of Honing Powder products, insure that the surface is well rinsed and a new pad is used.

4. Apply approximately 1/2 cup Polishing Powder plus 1 cup clean water to stone surface.

5. Refinish using a hand orbital sander or weighted floor machine at 130-140 lbs., 175 rpm, fitted with a natural hair pad.

6. Keep compound wet while refinishing with plenty of water. Add StoneTech Polishing Powder as needed.

7. Refinish area until the desired level of polish has been achieved.

8. For a highly polished finish follow with Shining Powder.

9. Rinse well and use a wet vacuum or hot water extraction unit to remove all remaining compound. Note: Above instructions are for reference purposes only. Please follow label directions on back of actual product.


StoneTech Polishing Powder Technical Data Sheet

StoneTech Polishing Powder Safety Data Sheet


Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

Floor Restoration
Stone Care Products
Stone Care Products > Restoration
Stone Care Products > Restoration > StoneTech Professional
StoneTech Professional
StoneTech Professional > Transform
StoneTech Professional > Transform > Polishing Powder
Floor Restoration > Chemicals, Compounds, and Powders