This Stone Knife-Weld Grade Epoxy is a very fast reacting 2-part non-flowing knife grade epoxy. Mix only enough that can be used within 12-15 minutes then apply immediately to precleaned surfaces. The epoxy glue will harden to 85%-95% of its absolute strength within 2 to 3 hours. Do not apply product when too much time has elapsed and the blend has become very thick and barely workable. It's ultimate strength will occur within several days at near room temperature conditions.

 

 

- Onto a clean, disposable mixing surgce, place an amount of Part A Compound. Add an equal amount of Part B Hardener.

- Mix both ingredients together. A putty knife or flat wooden stick is preferred because of the ease of scraping and mixing the ingredients together into a homogeneous blend.

- Fold together for 2 minutes.

 

Allow 2 to 4 hours cure time, depending on the temperature. Prevent glued parts from any movement until final cure is reached.