Stone Weld 3 Part Epoxy, Gallon - Stone Glue - Adhesives

CALL US: (888) 965-6577

Welcome


	Edge Details


	Tech Drawings


	Blade Speed


	Maintenance


	Contact Us

Home :: Adhesives :: Stone Glue :: Stone Weld 3 Part Epoxy, Gallon

Printable version

Categories

Special

Manufacturers
Gift certificates

Site Map

Help

Contact us Privacy statement Terms & Conditions Shipping/Freight Delivery Return Policy Troubleshooting Careers Blog Environmental

Stone Weld 3 Part Epoxy, Gallon

Stone-Weld 3 Part Epoxy is a strong, fast curing acrylic-based adhesive ideal for use on granite or marble. This 2 component mix is a combination of 2 parts of the "A" compound with 1 part of the "B" hardener. The hardener is almost water clear, thus allowing for extremely clear adhesive lines that do not turn the normal yellow, honey-color.

DIRECTIONS:

Thoroughly mix both ingredients for 3 minutes. Use a flat mixing paddle. Apply to previously cleaned / dry surfaces. Pot-life will be 5 - 15 minutes, depending on batch size and room temperature. Once glued, do not move or machine for about 3 hours. Allow longer if conditions are cold. Stone-Weld should be warm up to room temperature and parts to be glued should also be at room temperature. (If working conditions are 60 Degrees or below, expect slower cure and longer drying times).

Do NOT use pigments containing large amounts of Propylene Glycol, Polyester Styrene, Solvents or Water. Adhesion is greaty compromised.