|
Acrylpro Ceramic Tile Mastic is a high performance, pro formula adhesive that offers benefits to both the professional user and DIY customer. It spreads quickly and easily and offers extended open times for adjusting tile. It also provides higher bond strengths required for 12" x 12" (30 x 30 cm) ceramic floor tile installations and exceptional durability in wet areas. Can be used on ceramic, mosaic, quarry, pavers, gauged slate, porcelain and gauged stone tile.
APPLICATION INSTALLATION TO CONFORM TO ANSI A108.4. Using flat side of trowel, apply skim coat of adhesive with appropriate size trowel. Apply additional adhesive with notch side of trowel held at a 45° angle to the surface, combing in one direction. Press tile firmly into place in a perpendicular motion across ridges, moving back and forth. Perpendicular pressing flattens ridges and closes valleys allowing maximum coverage. With some tile, back buttering is advisable. Adjust tile promptly and beat in with block and rubber mallet. Periodically pull up a tile and check the back to ensure complete coverage with the adhesive. Do not apply more adhesive than can be covered with tile in 30 minutes. If adhesive starts to skin over (not sticky), re-trowel before setting tile.
COVERAGE:
Approximately 40 - 60 sq. ft. per gallon (3.7 - 5.6 m2) using a 3/16" x 5/32" (5 mm x 4 mm) V-notch trowel. |
