Custom Polyblend Sanded Tile Grout offers color consistency, fast setting time and a smooth texture for easy spreading and cleanup contractors prefer. Unmatched for its rock-hard curing properties, it produces dense joints that are highly resistant to shrinking, cracking, powdering and wear. Polymer-modified – mix with water for any tile or stone installation.

 

 

- For grouting vitreous, semi-vitreous or absorptive tile including ceramic, mosaic, quarry, pavers, cement, porcelain, brick, mini-brick, precast terrazzo and natural stone.

- For grout joints from 1/8" to 1/2" wide (3 - 13 mm).

- Use on floors, countertops, walls, ceilings, showers, fountains and pools. n For interior or exterior installations.

- Rated (ASTM C627) for residential to extra-heavy commercial use.

 

COVERAGE:  

Coverage will vary depending on tile size and joint width.

 

Installation to conform to ANSI A108.10. Lightly dampen absorptive, highly porous tile with clean, cool water but leave no standing water in the joints. Holding a rubber grout float at a 45° angle, force grout diagonally into joints ensuring joints are completely filled. Remove excess grout using edge of float held at a 90° angle. Cleanup can begin when grout can be only slightly indented when pushed hard with your fingernail or about 10 – 20 minutes depending on the type of tile and ambient temperature. Use as little water as possible for grout cleanup. Excess water will weaken the joint, cause variation in color, and may cause shrinkage, cracks or pinholes. Smooth and level joints and remove excess grout from tile with a damp (not wet) small pore grout sponge using a circular motion. Change water and rinse sponge frequently. Using clean water and sponge will enhance color uniformity. Wait 2 hours before removing haze from tile surface with a soft, dry cloth.