Mira Strip is a fast acting stripper designed to remove traditional solvent base coatings and waxes for preparation of one of our penetrating sealers and/or color enhancing products. It is easy to use and is recommended for removing Mira Matte color enhancer when necessary. It can also be effective as a cleaner for removing some food greases, tar and other hard to remove stains from porous materials. Use it on Polished & Textured Marble, Ceramic & Porcelain Tile, Polished & Textured Granite and Polished & Textured Natural & Cast Stone.

 

Application: Read entire label and PDS/MSDS before using. This product should be used directly from container and is not under any circumstances to be thinned or diluted with anything before use. Apply Mira Strip full strength to the surface with a clean mop. Be sure to completely saturate the surface being cleaned. Allow solution to sit on the surface for 10 - 20 minutes agitating periodically with the appropriate stripping pad or brush. Do not allow Mira Strip to dry on the surface. Agitate area one last time while adding more water and remove remains. Remove all Mira Strip from the surface with a wet vacuum or clean, dry towels. More than one application may be necessary to remove accumulated buildup. Thoroughly rinse completed area with clean water and allow to dry. Pour clean water on area being cleaned and agitate one last time before extracting all the dirty remains with a wet vacuum system. Note: Always allow used towels to completely dry before discarding. Once the coating and/or wax has been removed an additional deep cleaning may be necessary. For this procedure use the appropriate Miracle Cleaner as directed for each surface. (See the product chart).

Heavy Duty Cleaning: To remove lime, hard water deposits, efflorescence, grout haze, rust and other heavy dirt and grime use Phosphoric Acid Cleaner or GCFR (Grout & Concrete Film Remover) as directed. Do not use GCFR, Phosphoric Acid Cleaner or Sulfamic Acid Crystals on polished marble, limestone on any acid sensitive stone or tile. If an additional deep cleaning is necessary use Liquid Poultice cleaner as directed. All strippers and/or cleaners should be thoroughly rinsed with clean water and the materials allowed to dry.