|
Stone-Weld 3 Part Epoxy is a strong, fast curing acrylic-based adhesive ideal for use on granite or marble. This 2 component mix is a combination of
2 parts of the "A" compound with
1 part of the "B" hardener. The hardener is almost water clear, thus allowing for extremely clear adhesive lines that do not turn the normal yellow, honey-color.
DIRECTIONS:
Thoroughly mix both ingredients for 3 minutes. Use a flat mixing paddle. Apply to previously cleaned / dry surfaces. Pot-life will be 5 - 15 minutes, depending on batch size and room temperature. Once glued, do not move or machine for about 3 hours. Allow longer if conditions are cold. Stone-Weld should be warm up to room temperature and parts to be glued should also be at room temperature. (If working conditions are 60 Degrees or below, expect slower cure and longer drying times).
Do NOT use pigments containing large amounts of Propylene Glycol, Polyester Styrene, Solvents or Water. Adhesion is greaty compromised. |
