|
StoneTech Professional Oil Stain Remover is the professional's choice for pulling out deep, set-in oil stains. It leaves no residue and it will not discolor your natural stone. It's ideal to use on natural stone such as marble, granite, limestone, travertine, slate & sandstone.
Great for ceramic & porcelain tile, masonry & concrete.
Item# D12446904
Features and Benefits:
• Pulls out deep, set-in oil stains
• Leaves no residue
• Will not discolor stone
• Easy to use
Directions:
Always test in a small inconspicuous area to determine that the desired results will be achieved. Make sure surface is clean, dry and free of waxes and coatings.
1. Using a plastic or wood spatula, stir thoroughly to mix the paste.
2. Apply a 1/4” thick layer of paste to the stain. Insure that the paste extends at least 1"-2" beyond the edge of the stain.
3. Do not cover.
4. Allow 48-72 hours for paste to completely dry to a powder.
5. Remove powder and discard.
6. Allow solvent to completely dry from the stone.
7. If stain is not completely gone after drying, repeat process.
8. Clean up residue and tools with mineral spirits.
9. Reseal cleaned area. Note: Above instructions are for reference purposes only. Please follow label directions on back of actual product.
This Pint size will cover ½-1 sq. ft. of surface at 1/4" thickness.
|
