Acrylpro 4000 1 Gallon

Custom Building Products
SKU:
40.33200
$25.44
(No reviews yet)
Current Stock:
Adding to cart… The item has been added
Acrylpro 4000 is a high performance, professional adhesive that spreads quickly and easily. Provides higher bond strengths required for 12” x 12” ceramic floor tile installations with exceptional durability in wet areas. Protected by MoldGard® Technology to resist mold and mildew growth.

Application:
 

APPLICATION INSTALLATION TO CONFORM TO ANSI A108.4. Using flat side of trowel, apply skim coat of adhesive with appropriate size trowel. Apply additional adhesive with notch side of trowel held at a 45° angle to the surface combing in one direction. Press tile firmly into place in a perpendicular motion across ridges, moving back and forth. Perpendicular pressing flattens ridges and closes valleys allowing maximum coverage. With some tile, back buttering is advisable. Adjust tile promptly and beat in with block and rubber mallet. Periodically pull up a tile and check the back to ensure complete coverage with the adhesive. Do not apply more adhesive than can be covered with tile in 30 minutes. If adhesive starts to skin over (not sticky), retrowel before setting tile.

 
 
Sq Ft Coverage / Gallon:
 
TROWEL SIZE & COVERAGE (SQUARE METER PER 3.78 L) 
3/16" x 5/32" V-Notch *40 - 60 sq. ft. (5 x 4 mm) (3.7 - 5.6 M2) for tile up to 6" x 6" (15 x 15 cm)
1/4" x 1/4" x 1/4" Square-Notch *15 - 25 sq. ft. (6 x 6 x 6 mm) (1.4 - 2.3 M2) for tile up to 12" x 12" (30 x 30 cm)
1/4" x 3/8" x 1/4" Square-Notch *10 - 14 sq. ft. (6 x 9 x 6 mm) (.93 - 1.4 M2) for tile over 12" x 12" (30 x 30 cm)
40.33200:
ARL40001-2