Custom CEG-Lite, Part B

Custom Building Products
SKU:
40.00172
$84.61
(2 reviews)
Current Stock:
Adding to cart… The item has been added

Custom CEG-Lite, Part B

Click Here: Purchase CEG-Lite, Part A

CEG-Lite Commercial Epoxy Grout, a lightweight 2-part 100% solids epoxy grout formulated with Custom’s exclusive CustomLite Technology. CEG-Lite Epoxy Grout represents a major breakthrough in epoxy technology, delivering the high stain and chemical resistance professionals expect, combined with handling characteristics and versatility that far surpasses other epoxy grouts.

CEG-Lite is formulated with the same recycled content found in Custom’s other lightweight setting materials, making it the first 100 percent solids epoxy grout that contributes to LEED certification based on recycled content, which also affects the handling of the product, giving a smoother consistency providing increased spread ability.

 

Features:
  • Use with virtually any tile
  • Use to fill joint widths from 1/16 in. to 1/2 in.
  • Color consistent, stain and chemical resistant
  • Initial set in 4 hours, final set in 5 hours


Mixing Procedures:

Open Part B and stir thoroughly to eliminate the effects of settling due to shipping. Add the entire contents of the pigment Part A to Part B and stir to produce a homogeneous consistency, eliminating any color streaks from appearing in the mixed unit. Do not mix partial units. Make sure to scrape bottom and sides of container during mixing.


NOTE: If using small 1-gallon unit, mix with 1 unit of color. If using large 2-gallon unit, mix with 2 units of color. If a power mixer is used, it must be 300 RPM or less to avoid entrapping air bubbles which can cause pinholes in the grout. Do not over mix as this will cause the epoxy to flash set



Coverage:

Coverage will vary by joint size. See Data Sheet for more information on coverage.

 

Material Calculator

Safety Data Sheet - PART B

Technical Data Sheet

40.00172:
LWCEGB1T-EA
40.00174:
LWCEGB2T

Reviews

  • 4
    This stuff is tough

    Posted by Jessica

    It hardens VERY quickly. Definitely read directions. It is hard to work with and you need to clean it off of everything before it dries. This stuff is indestructible, which is it's pro and con. I love it, and i'm hoping it will last forever. As someone else had stated stonetooling does have AMAZING customer service, which is a plus for me.

  • 5
    Great !!!

    Posted by Calvin Temple

    If you follow the direction to the tee, you will have a great looking grout lines when completed. A little harder to work with but worth the effort. I will use this product again. StoneTooling has great customer service.