Custom SpeedSet Thinset Mortar (25 lbs.)

Custom Building Products
$21.76 - $26.14
(No reviews yet)
Current Stock:
Adding to cart… The item has been added

Custom SpeedSet Thinset Tile Mortar

Custom SpeedSet Thinset Mortar works great for homeowner tile repairs and smaller jobs. Use this fast-setting mortar for time critical installations such as restaurants, malls and hotel lobbies. Excellent for commercial use and for cold temperature installations. Item# SDS25


Features:
  • Fast setting polymer-modified mortar for time critical installations
  • Grout in 2 hours – traffic in 6 hours
  • Great for tile repairs and smaller jobs
  • Exceeds ANSI A118.4 and A118.11
Application:

INSTALLATION TO CONFORM TO ANSI A108.5. Use proper sized notch trowel to ensure 100% coverage under tiles. Using flat side of trowel, apply skim coat of mortar to the surface. Apply additional mortar with notched side of trowel held at a 45° angle to the surface, combing in one direction.

Press tile firmly into place in a perpendicular motion across ridges, moving back and forth. Perpendicular pressing flattens ridges and closes valleys allowing maximum coverage. With some tile, back buttering is advisable. Adjust tile promptly and beat in with block and rubber mallet. Mortar can be applied up to 1/4" (6 mm) thick after beat in. For thicker applications, use a medium bed mortar. Periodically pull up a tile and check the back to ensure complete coverage with the adhesive.

Do not spread more material than can be tiled in 10 minutes or while material has wet tack (sticky to the touch). If material has skinned over (not sticky), recomb with notch trowel. If too dry, remove and replace with fresh material. Material in bucket will remain workable for approximately 30 minutes.

 
Coverage & Trowel Size:
45 - 50 sq. ft. (4.2 - 4.6 m2), 1/4" x 1/4" x 1/4" Square-Notch (6 x 6 x 6 mm)
32 - 35 sq. ft. (3.0 - 3.2 m2), 1/4" x 3/8" x 1/4" Square-Notch (6 x 9 x 6 mm)
23- 25 sq. ft. (2.1 - 2.3 m2), 1/2" x 1/2" x 1/2" Square-Notch (13 x 13 x 13 mm)
18 - 20 sq. ft. (1.7 - 1.8 m2), 3⁄4" x 9⁄16" x 3⁄8" U-Notch (19 x 14 x 9 mm)
40.34900:
SDS25
40.10070:
SDSW25