FREE SHIPPING ON QUALIFYING ORDERS
GRABO PRO-Lifter (GP-1LI-FB)
Grabo
$299.00
(No reviews yet)
Write a Review
Grabo
GRABO PRO-Lifter (GP-1LI-FB)
The GRABO Pro lifting tools come with a smart digital pressure sensor, digital display and smart settings for both weight and pressure.
GRABO PRO-Lifter (GP-1LI-FB)
The GRABO Pro is a versatile lifting tool equipped with a robust vacuum pump. The foam rubber vacuum seal on the GRABO Pro tool is solid and resistant to loss of vacuum pressure. Once the pressure pump is activated, it creates a strong suction and firmly attaches to any non-porous flat surface. The suction is strong enough to hold firm even loads as heavy as 375 lbs. To lift any slab of flat solid material, simply turn on the unit and place it straight on the surface. The GRABO Pro automatically monitors the vacuum, and if vacuum pressure is lost, the pump is automatically powered up until the vacuum pressure is restored.The handle is also equipped with a digital display that shows the maximum weight that the GRABO Pro can safely lift at that very moment. The weight is displayed in both pounds and kgs.
The Pro-Lifter is equipped with an innovative digital pressure sensor. This makes it even more effective on different surfaces. With a simple press of a button, the lifting function is automatically activated and regulated. The sensor automatically provides for the optimum suction level, keeping objects in complete control whether the object is being lifted or even during movement.
The digital display on the grab handle shows the pressure applied in both bars and psi. You don’t have to worry about turning the vacuum pump on or off with the pressure sensors. The automatic sensor is especially useful when lifting and moving coarse materials. The sensors digitally detect and maintain the required pressure while transferring the object being lifted. This provides for precision handling and installation without too much of a hassle. In any case, the sensor automatically stops the pump on reaching a maximum vacuum capacity of 11.6 PSI.
The digital display on the grab handle shows the pressure applied in both bars and psi. You don’t have to worry about turning the vacuum pump on or off with the pressure sensors. The automatic sensor is especially useful when lifting and moving coarse materials. The sensors digitally detect and maintain the required pressure while transferring the object being lifted. This provides for precision handling and installation without too much of a hassle. In any case, the sensor automatically stops the pump on reaching a maximum vacuum capacity of 11.6 PSI.
| Model/SKU | |
|---|---|
| Model/SKU | GRABO PRO-LIFTER 20 / GP-1Li-FB |
| Battery | 14.8VDC 2600mAh Li-ion |
| Rated Power | 16W |
| Charger Input Voltage | 100-240VAC 50/60Hz |
| Battery Charging Time | ~2hrs |
| Non-Stop Running Time (Full Charge) | 1.5hrs |
| Running Cycles (On Full Charge) | 900 ON-OFF cycles of 10 seconds |
| Stand-by Mode (Charge Hold) | 30 days |
| Pump Service Life | 100000+ ON-OFF cycles / 800+ hrs continuous |
| Rated Air Flow | 0.7cfm (20 L/min) |
| Maximum Vacuum Rate | 11.6Psi (0.8 Bar, 80 kPa) |
| Maximum Lifting Capacity | 375Lbs (170 kg) |
| L x W x H | 11.77 x 7.22 x 4.76” (300 x 184 x 121 mm) |
| Net Weight (With Battery) | 3.2Lbs ( 1.5 kg ) |
| Working Temperature | 32°F~140°F ( 0°~60 °C ) |
| Applicable Surface Type |
Peak/valley heights less than 0.1” (3mm),
arc less than 5° |
| Additional Features |
Pump stops automatically at maximum vacuum
rate ( 11.6Psi / 0.8 Bar ) |
- 80.00599:
- GP-1LI-FB-1S
