Home > Stone Care Products >

Aqua Mix Enrich'N'Seal- Quart
Aqua Mix Enrich'N'Seal Sealer, Quart

Price: $64.75

Product Code: 30.39300


Aqua Mix Enrich'N'Seal Sealer

Confused by Sealers? Take a look here: Sealer Buying Guide

Aqua Mix Enrich'N'Seal Sealer is a premium, no-sheen, enhanced-look penetrating sealer formulated to darken, enrich and highlight the character and beauty of unsealed natural stone. It rejuvenates the color and improves the appearance of worn and weathered stone.

You can also use it as a pre-grouting sealer and allows moisture-vapor transmission. It also effectively seals and darkens the color of grout joints.

Aqua Mix Enrich'N'Seal Sealer is recommended for use on unsealed natural stone such as marble, granite, slate, limestone, travertine, quartzite and sandstone. Great for interior and exterior applications.


It covers approximately 500 to 1,500 sq. ft. (46 m2 to 139 m2) per coat per gallon (3.785 L), depending on type of stone, porosity and texture of surface, temperature, humidity, and method of application.


1) Read entire label before using.

2) For new installations, sealer can be applied as soon as 48 hours after grouting.

3) Surface must be clean, dry, and free of existing sealers or coatings.

4) Apply using a sponge, brush, paint pad, cotton towel, or sprayer. NOTE: Be sure any sealer that does not penetrate surface is polished dry off surface within 5 minutes of each application using absorbent paper or cotton towels. If non-polished surfaces are left shiny after application, surfaces must be wiped dry as this indicates surface residue remains.

5) If 2 or more coats are applied, allow a minimum of 30 minutes drying time between coats. Remove surface residue after each application.

6) Ready for surface traffic in 12 hours after final coat. Keep dry for 12 hours. Achieves full cure in 48 hours. Some highly porous surfaces may require an additional coat after full cure.

7) Clean applicator tools with mineral spirits after each use.

Pre-Grouting Application:

Apply over clean stone or tile a minimum of 2 hours prior to grouting - follow application procedures above.

Average Customer Review: Average Customer Review: 5 of 5 5 of 5 Total Reviews: 2 Write a review.

  0 of 0 people found the following review helpful:
5 of 5 Very simple and easy to use site! May 23, 2014
Reviewer: Matthew Lansing from Plover, WI United States  
I could not be happier with the ease of using the site and the speed at which my order arrived!

Was this review helpful to you?

  0 of 0 people found the following review helpful:
5 of 5 stone tile - sealers August 20, 2012
Reviewer: Bryce from New York, NY United States  
The guys at Stone Tooling were great!!! Both the fellows I spoke with were courtious and knowledgebale - imporant! We installed travertine tile and needed the proper sealer,,, Enrich and Seal was perfect,,,especially since we bought Sealers Choice Gold at $100 a gallon...Luckily HD took it back,,, Thanks Stone Tooling...you staff really knows thier stuff!!!

Was this review helpful to you?

Browse for more products in the same category as this item:

Stone Care Products
Stone Care Products > Sealers
Stone Care Products > Sealers > Aqua Mix
Aqua Mix
Aqua Mix > Sealers
Aqua Mix > Sealers > Enrich N Seal
Stone Care Products > Enhancing Products > Aqua Mix
Stone Care Products > Enhancing Products