Aqua Mix Grout Haze Clean-Up - Pint

Aqua Mix Grout Haze Clean-Up is a safe and effective concentrated cleaner that is added to the final bucket of grout cleanup water for removal of cementitious grout haze and latex additive film from tile during the grout cleanup process.

Aqua Mix Grout Haze Clean-Up may also be used full-strength to remove light grout residue within the first 10 days after grouting.

It's recommended for use on unpolished natural stone (such as granite, limestone, marble, slate, and travertine), polished granite and slate, ceramic, porcelain, quarry, saltillo, terra cotta, cement pavers, masonry surfaces, and other stone and tile surfaces.


Coverage

It covers approximately 300 to 600 sq. ft. per pint depending on dilution.


Available Size

Pint


Application

During Grout Cleanup:

1.) Read entire label before using.

2.) Perform grout cleanup per grout manufacturer’s instructions.

3.) During final grout cleanup rinse, mix a minimum of 3 ounces (90 ml) of Grout Haze Clean-Up per gallon (3.785 L) of water.

4.) Wet a grout sponge or terry cloth towel with the cleaning solution, wring out excess liquid.

5.) Wipe diagonally across the tile.

6.) Repeat steps 4 and 5 every 10 to 15 sq. ft. (.9 m2 to 1.3 m2) or as necessary.

7.) Remove residual cleaning solution using a clean grout sponge or terry cloth towel dampened with clean water only.


After Grout Cleanup - Within 10 Days Of Grouting:

1.) Use full-strength if grout haze was not completely removed during grout cleanup.

2.) Apply directly to surface and agitate with white nylon scrub pad or brush.

3.) Allow product to dwell for 5 to 10 minutes for stubborn areas or heavier grout residue.

4.) Rinse with clean water to remove residual cleaning solution.


Aqua Mix Grout Haze Clean-Up Technical Data Sheet

Aqua Mix Grout Haze Clean-Up Safety Data Sheet