Custom CEG-Lite, Part A

Custom Building Products
SKU:
40.00252
$28.85
(1 review)
Current Stock:
Adding to cart… The item has been added

Custom CEG-Lite Commercial Epoxy Grout, Part A

COLOR CHART
Click Here: Purchase CEG-Lite, Part B

CEG-Lite Commercial Epoxy Grout, a lightweight 2-part 100% solids epoxy grout formulated with Custom’s exclusive Custom Lite Technology. CEG-Lite represents a major breakthrough in epoxy technology, delivering the high strain and chemical resistance professionals expect, combined with handling characteristics and versatility that far surpasses other epoxy grouts.

CEG-Lite Epoxy Grout is formulated with the same recycled content found in Custom’s other lightweight setting materials, making it the first 100 percent solids epoxy grout that contributes to LEED certification based on recycled content, which also affects the handling of the product, giving a smoother consistency providing increased spreadability.

NOTE: The following colors were discontinued in March 2015 and will only be available while supplies last: Antique Linen, Quarry Red Clay, Chaparral, Canvas, Camel, White Dove, Arctic Ice, Moss, Butter Cream, Ocean Blue, Burnt Clay, Bay Leaf, Onyx Green, Slate Gray, Admiral Blue, Bonsai, and Rose Beige.

 
Features:
  • Use with virtually any tile
  • Use to fill joint widths from 1/16 in. to 1/2 in.
  • Color consistent, stain and chemical resistant
  • Initial set in 4 hours, final set in 5 hours



Mixing Procedures:

Open Part B and stir thoroughly to eliminate the effects of settling due to shipping. Add the entire contents of the pigment Part A to Part B and stir to produce a homogeneous consistency, eliminating any color streaks from appearing in the mixed unit. Do not mix partial units. Make sure to scrape the bottom and sides of the container during mixing.


NOTE: If using a small 1-gallon unit, mix with 1 unit of color. If using a large 2-gallon unit, mix with 2 units of color. If a power mixer is used, it must be 300 RPM or less to avoid entrapping air bubbles which can cause pinholes in the grout. Do not overmix as this will cause the epoxy to flash set


Coverage will vary by joint size. See Data Sheet for more information on coverage.

Material Calculator

Safety Data Sheet - PART A

Technical Data Sheet

40.00252:
LWCEG333AT-EA
40.00487:
LWCEG10AT-EA
40.10450:
LWCEG545AT-EA
40.00173:
LWCEG382AT-EA
40.00333:
LWCEG381AT-EA
40.10303:
LWCEG546AT-EA
40.00057:
LWCEG60AT-EA
40.00483:
LWCEG183AT-EA
40.00171:
LWCEG165AT-EA
40.10427:
LWCEG370AT-EA
40.10451:
LWCEG543AT-EA
40.00331:
LWCEG105AT-EA
40.10452:
LWCEG542AT-EA
40.00444:
LWCEG380AT-EA
40.10454:
LWCEG186AT-EA
40.00329:
LWCEG145AT-EA
40.00570:
LWCEG122AT-EA
40.00338:
LWCEG135AT-EA
40.00469:
LWCEG09AT-EA
40.00253:
LWCEG185AT-EA
40.00358:
LWCEG386AT-EA
40.00285:
LWCEG19AT-EA
40.10455:
LWCEG115AT-EA
40.00078:
LWCEG101AT-EA
40.10360:
LWCEG544AT-EA
40.10456:
LWCEG95AT-EA
40.00484:
LWCEG59AT-EA
40.10457:
LWCEG22AT-EA
40.10458:
LWCEG180AT-EA
40.00486:
LWCEG45AT-EA
40.00733:
LWCEG52AT-EA
40.10460:
LWCEG540AT-EA
40.10355:
LWCEG172AT-EA
40.10461:
LWCEG541AT-EA
40.10262:
LWCEG335AT-EA
40.12467:
LWCEG641AT-EA

Reviews

  • 5
    Great !!!

    Posted by Calvin Temple

    Part A was leaking when I received it. Called and Stone Tooling took care of the problem. Followed the directions and was able to do a great job.