Home > Setting Materials > Underlayments >

Savings!!! Laticrete Hydro Ban Waterproofing Membrane
Hydro Ban - Laticrete Waterproofing Membrane,


 
Sale price good through 12/31.
Reg. Price:
1 Gallon Reg. $79.95
5 Gallon Reg. $329.00

Savings!!! Limited time offer:
Price from: $73.62


Product Code: 40-91720


Size*:


Qty:  
Description
 
Savings!!!

Laticrete Hydro Ban Waterproofing Membrane

LATICRETE Hydro Ban is a versatile waterproofing membrane that LATICRETE has developed to eliminate the need for the use of fabric in the field, coves, or corners. Hydro Ban is a liquid rubber polymer that can be applied in a similar fashion to paint, forming a flexible and seamless waterproofing membrane over the surface. The thin, load bearing waterproofing membrane is self curing and provides anti-fracture protection of up to 1/8” (3 mm) over shrinkage and other non-structural cracks.


Easy to Apply & Fast to Cure
The waterproofing membrane is easy to use and apply. LATICRETE Hydro Ban can be applied right out of the pail using a paint brush, paint roller, or trowel over a suitable substrate. After curing, tile, brick, and stone can be installed directly onto the membrane. A fast curing time (when cured at 70°F (21°C) and 50% RH) allows for foot traffic in 4 – 6 hours and for flood testing in 24 hours. When fully cured, the membrane changes in color from a light sage to an olive green.


Use for Showers & Other Waterproofing Applications
LATICRETE Hydro Ban is ideal for a variety of applications that require waterproofing. Containing Microban antimicrobial product protection, the waterproof membrane is IAPMO (International Association of Plumbing and Mechanical Officials) approved. Hydro Ban can be used in both interior and exterior applications including showers, bathrooms, swimming pools and hot tubs, fountains and water features, kitchens, counter tops, facades, and terraces and balconies over unoccupied spaces.


Features & Benefits

  • Allow for flood testing in 2 hours at 70°F (21°C) or higher (Refer to cautions section for more information on curing)
  • Does not require the use of fabric (For gaps 1/8" (3 mm) or less see DS 663.5 for complete instructions)v
  • Thin; only 0.020–0.030" (0.5–0.8 mm) thick when cured
  • Bonds directly to metal, PVC and ABS plumbing fixtures only
  • Anti-fracture protection of up to 1/8" (3 mm) over shrinkage and other non-structural cracks
  • “Extra Heavy Service” rating per TCNA performance levels (RE: ASTM C627 Robinson Floor Test)
  • Changes in color from a light sage to an olive green when cured
  • Equipped with anti-microbial technology to protect the treated article.
  • Rapid drying for a faster time to tile
  • Install tile, brick and stone directly onto membrane
  • Exceeds ANSI A118.10 and A118.12
  • IAPMO approved
  • Lighter color for ease of inspection
  • No solvents and non-flammable

Suitable Substrates

  • Cement Backer Board (Consult cement backer board
  • manufacturer for specific installation recommendations and to verify acceptability for exterior applications)
  • Cement Terrazzo (If skim coated with a Latex Thin-Set Mortar)
  • Ceramic Tile & Stone (If skim coated with a Latex Thin-Set Mortar)
  • Exterior Glue Plywood (Interior Applications Only)
  • Gypsum Wallboard (Interior Applications Only)
  • Concrete
  • Concrete and Brick Masonry
  • Cement Mortar Bed
  • Cement Plaster
  • Poured Gypsum Underlayment (Interior use only. follow TCNA Guidelines / Methods: F200, RH122, F180)

Approximate Coverage
  • 1 Gallon - 50 sq.ft.
  • 5 Gallon - 250 sq.ft.

Available Sizes
  • 1 Gallon
  • 5 Gallon





Laticrete Hydro Ban Product Data Sheet

Laticrete Hydro Ban Safety Data Sheet

Laticrete Hydro Ban Installation Instructions

Laticrete Hydro Ban Spraying Instructions

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

Setting Materials > Underlayments
Setting Materials
Laticrete
Laticrete > Waterproofing
Specials