IMER Mighty Small EVO 50 Pumping / Spraying Machine - No Compressor
IMER Mighty Small 50 Spraying & Pumping Machine

Alternative Views:

Price: $7,989.99
Shipping: Please note, a commercial address is a location in a commercial zone, with a loading dock or forklift, open Monday thru Friday during normal business hours. Please click truck icon below for full description.

Manufacturer Part #: 1106344

Product Code: 80.01003


This item ships via freight.
Click here for more info.

IMER Mighty Small 50 Sprayer Mixer
*FREE Shipping is available only to a Commercial Address.*
Need to ship to a Non-Commercial Address? Click Here

CLICK HERE: Purchase Optional Hose and Gun Kits

CLICK HERE: Setup & Applications for the Mighty Small 50

The Mighty Small 50 EVO & PLUS models are the most versatile PUmp & Spray Machines on the market. Created to easily portable multi-purpose pump and spray machine. You may configure the pump with many different accessories depending on the required application. Whether it is pumping grout into forms, on a bridge deck repair project, spraying fireproofing on a high-rise building, or filling blocks with grout, our pumps are the right solution when you have a rigorous pumping application.

The Mighty SMALL 50 can operate continuously on 110v 20 amp service. This machine has the ability to spray or pump up to 3.5 gallons of material per minute through 85 ft. of 1" hose. The versatility of the Mighty SMALL 50 is very impressive - spray fireproofing, pump grout into door jams, fill molds at precast plants, spray stucco onto residential homes, apply the grout to finish rock walls

Just like the Step Up 120 the Small 50 has a diagnostic computer on board. Should there be a problem with the current, the motor running hot, or the material being applied to become unsuitable for pumping, the LED display screen will let you know.

With the optional Dual Diaghragm Compressor, the IMER Mighty Small 50 can be used for spraying applications. It delivers a high volume output with low pressure. This compressor is also set up and calibrated to operate as per the instructions of the Mighty Small 50 computer. It is also maintenance-free as it can operate without an oil reservoir.

Several gun kits are available including Fine Coatings Gun Kit (fine spray/stucco), Tuck Point Gun Kit, Controlled Grout Gun Kit, and Koine Gun Kit (Premixed Mortar/Fireproofing). Other accessories include Vibrating Hopper, 5' Overhead Wand great for fireproofing applications, and Pipe Hook for filling block or door jambs. Material Pump Hoses are available in lengths including 16', 33', and 50'.

Because of the versatility and wide range of applications of the IMER Mighty Small 50 Sprayer Mixer, the Dual Diaghragm Compressor and all accessories, including hoses and gun kits, are sold separately. This allows you to select only the accessories needed for your job.

Standard Equipment:
  • Tool box, clean-out tool, sponge ball
  • 90’ 24 Volt cable remote
  • Pressure gauge

Optional Accessories:
  • Dual diaghragm compressor
  • Mortar & Fireproofing gun kit
  • Stucco & Fine Coatings gun kit
  • Vibrating screen
  • Grout injection kit
  • Pipe hook
  • 5’ overhead wand
  • Tuck pointing kit


QUICK SPECS Mighty Small 50 Step Up 120
Motor 115 Volt 220 Volt, 1 phase or 220 volt, 3 phase
Horsepower 1-3/4 6
Pumping system 2L3 rotor/stator IM25L rotor/stator
Flow rate 3.5 GPM 6.6 GPM
Max. pumping pressure 300 PSI 450 PSI
Max. aggregate size 1/4" 3/8"
Hopper capacity 12.5 Gal. 31 Gal.
Compressor output 45 PSI @ 9 CFM 45 PSI @ 9 CFM
Weight (palletized) 110 (150) Lbs. 870 (1000) Lbs.

Length 44" (50") 80" (86")
Height 20" (25") 33" (50")
Width 25" (28") 50" (64")

IMER Mighty Small 50 Part # 1106344

Click HERE for Product Manual

Share your knowledge of this product with other customers... Be the first to write a review