IMER - Tile & Stone Saws, Mixers

Replacement spring IMER Combi saws.

Replacement Bucket 1193968 for the IMER Mini-Mix 60 Mortar Mixer.

Cement Concrete Mixer ON/OFF Switch.

Imer Part # 3209539

The IMER Combi 250 VA On/Off Switch is designed to fit Combi 200VA, 250VA, 250/1000VA Tile Saws, Mix 60 & Masonry 350 Smart Cut Saw

Replacement 220v water pump with a long power cord for IMER Combi saws.

IMER Mortarman 120 Plus Mixer Rubber Paddle Add-On Kit is for those needing to add rubber scrapers to their IMER Mortarman 120 Plus Multi Mixer.

IMER 1” Material Hose with cam coupling for IMER Mighty Small 50. Lengths: 16', 33', 50'.

IMER’s SB707 premium diamond blades are built to tackle Block, Brick, Paver Brick, Hard Brick, Masonry, Natural Stone, Refractory Material, Artificial Stone, Sandstone, Soft Stone, Stone.

Sprays overhead or into hard to reach spaces, includes a tip. For the IMER Mighty Small 50 and IMER Silent 300.

Mix 200 - 275 lbs. of mortar, stucco, grout, or concrete in less than 4 minutes with the IMER Minuteman II Mixer.

Premixed mortar / Fireproofing Kit Used for spraying rough coats where material needs to be built-up.

The IMER Wheelman II 5 cu. ft. Portable Mulitmixer can hold 250 lbs of material per batch and is the largest capacity portable mixer on the market today.

The Lightweight, Quiet, Portable Yet Powerful Mix All 60 Saves Time and Reduces Labor Costs The Mix All 60 can go anywhere and allows true one person repair work made easy. If you need to mix mortar in the attic to tuck point a chimney, the Mix All 60 is your answer.

Stucco/Tuck Point Kit Used for spraying rough coats where material needs to be built-up.

For the IMER Mighty Small 50 Sprayer Mixer, the vibrating screen prevents unmixed materials from entering into the hopper.

The Imer Combi 200VA Tile Saw w/Stand is the most accurate lightweight tile saw made today.

The Imer Combi 250 VA takes saw design and engineering to a whole new level.

The Combi 250/1000 Lite w/Stand is designed to cut today's tile and stone pieces which are larger and more expensive then in years past.

For IMER Mighty Small 50 Sprayer Mixer. The compressor must be purchased if you wan to both pump and spray material.

Cutting bricks, blocks, paving stones, or tile is a breeze on the biggest cutting table available on a 14” Masonry Saw.

The Combi 250/1000 Lite w/Stand is designed to cut today's tile and stone pieces which are larger and more expensive then in years past.

The Imer Workman II 250 Towable Multimixer (Electric or Gas) is ideal for any jobsite project.

he Imer Workman II 350 Towable Multimixer is ideal for any jobsite project.

The IMER Mortarman Plus 120 is ideal for the 2-3 person construction crew so there is no need for all the hassles of towing a mixer to the job site.

The all new 350/1200 iPower is more powerful and accurate than ever before. The new 4 h.p. motor combined with the laser guide ensures that cuts are made quickly and accurately.

Cutting Blocks just got a lot easier! The Masonry 750 allows the operator to cut 8” and 10” blocks in a single pass – without the added hassle and effort of a foot pedal.

Imer Mortarman 360 series mixer produces 9 cu. ft. of mud every three to four minutes.

The Mighty Small 50 is the only 110v pump made that can really get the job done day in and day out on a wide variety of job sites.

IMER's Workman 750' vertical shaft mortar mixer is designed to be the perfect partner for busy precast mixing operations. This is why it's output has been increased to 9-18 cu. ft. of mud every three to four minute.

The Step-Up 120 is designed for the applications that need to be pumped and sprayed with more flow and pressure.

Imer Silent 300 Pump quickly and easily apply materials such as plasters, mortars, stucco (cement and synthetic based) fire proofing, sound proofing and paint.