 |
 |
 |
|
Laticrete HYDRO BARRIER™ Plus Waterproofing & Crack Isolation Membrane
HYDRO BARRIER™ Plus is a thin, load-bearing, self-curing liquid rubber polymer that can be easily applied to horizontal or vertical surfaces, both interior and exterior, to create a flexible, seamless waterproofing and crack isolation membrane. IAPMO approves it for use as a shower pan liner. It is equipped with Microban® antimicrobial protection to prevent the growth of odor and stain-causing mold, mildew, and bacteria.
Features & Benefits
- Allows for flood testing in 12 hours^
- Thin; only 0.020–0.030" (0.5–0.8 mm) thick when cured
- Changes in color from a light blue to darker blue when cured
- Lighter color for ease of inspection and enhanced visibility during application
- Anti-fracture protection of up to 1/8" (3 mm) over shrinkage and other non-structural cracks
- No additional fabric is required.
- “Extra Heavy Service” rating per TCNA performance levels (RE: ASTM C627 Robinson Floor Test)
- Exceeds ANSI A118.10 and A118.12
- IAPMO approved
- Equipped with Microban antimicrobial technology to protect the membrane from the growth of stain and odor-causing bacteria, mold, and mildew
- Safe—no solvents and non-flammable
^When cured 70°F (21°C) or higher at 50% RH lower temperatures at higher RH will require long cure times.
|
|
|
 |
|
 |
|