Laticrete Latapoxy 300 Epoxy

Latapoxy 300 Adhesive is a chemical resistant, epoxy adhesive that will bond to most sound, clean surfaces. Adhesive spreads easily and cleans with water while fresh. Latapoxy 300 Adhesive is a factory-proportioned kit consisting of epoxy resin, hardener and chemical resistant silica filler. Latapoxy 300 Adhesive can be used in interior and exterior (see limitations) walls and floors, wet and dry areas.

Uses:

For heavy duty commercial chemical resistant installations in food processing areas, commercial kitchens, restaurants, etc. Also use Latapoxy 300 Adhesive to install all types of ceramic tile, marble and natural stone over post-tensioned and precast floor systems. Also recommended for rubber flooring and wood block floors and the installation of green marble, white marble and agglomerate marbles that have a tendency to stain, darken or warp when installed with water-based installation materials.

Package:

Weight: 25.2 lb (11.4 kg) volume: 1.8 gals (6.8 l)

Approximate Coverage #2 Unit:

With 1/16" (1.5 mm)* v-notch trowel 180–200 sq. ft / 16.2–18 m2

With 3/16" (4 mm ) v-notch trowel 70–80 sq. ft /6.3–7.2 m2

With 1/8" x 1/8 (3 x 3 mm) square notch trowel 90–110 sq. ft /8.4–102 m2

With 1/4 " x 1/4 (6 x 6 mm) square notch trowel 30–35 sq. ft /2.8–3.3 m2