Laticrete STRATA_HEAT Mat (160 sq ft.)

Laticrete Strata_Heat Mat combines the comfort of floor heating wire with the advantages associated with Strata_Heat uncoupling membrane. Warm your tile floor and enhance the mechanical bond to the substrate. Strata_Heat will provide faster drying of the mortar, allowing for a shorter time to grout.

At the same time, it will easily hold the Strata_Heat Wire in 2, 3, or 4 peg positions for floor heating or warming installations. Just like our other uncoupling membranes, it is specifically designed for use with both modified and unmodified mortars, you can use the appropriate mortar for the installation.

• For use with STRATA_HEAT WIRE and STRATA_HEAT THERMOSTAT to provide luxury and comfort to your room
• Multiple spacing options allow for variability in Heat output
• Mortar Hydration Vents - creates a mechanical bond between the mat and adhesive mortar - allows the mortar to cure faster providing a stronger bond of tile for faster time to grout
• Allows for use of the appropriate mortar per industry standards.
• Provides vapor management
• Separates the substrate stress from the tile installation - eliminates transmission of in-plane substrate cracks of up to 1/8" (3 mm).
• Instant coverage verification· allows for the installer to see mortar coverage underneath the
mat during installation without having to lift and verify
• Allows for easier floor layout as chalk lines are easily visible on the surface prior to tile installation

• Concrete
• Mortar Beds
• OSB**
• Exterior Glue Plywood***
• Cement Backer Board
• Cement Terrazzo
• Resilient Flooring
• Existing Tile Or Stone
• Gypsum Underlayment Or Light Weight Concrete*

• 160 sq ft. roll
• Thickness: 1/4"
• Packaging
• Laticrete part #: 0179-0161-H