MK-101 Pro 24 Tile Saw w/ JCS Stand- MK Diamond
The MK-101 Pro24 JCS has all the features of the MK-101 but with an extended frame that allows the cutting of tiles up to 24" in length and an integrated stand that allows operator to set up or transport in a matter of seconds.
In addition it is equipped with an aluminum table with nonslip molded neoprene surface. The permanently lubricated blade shaft bearings provide years of maintenance-free operation. The blade guard has been engineered to provide optimal water flow and is wide enough to accommodate a profile wheel.
Powerful Motor for Tough Materials
The MK-101 Pro 24 Tile Saw by MK Diamond is a powerful, professional tile saw built for durability and precision. The 1-1/2 HP, high torque AC motor is engineered to give ample power to take on tough materials including marble, granite, tile, porcelain, and more. Maximum horsepower from motor to blade is produced by the Micro V-belt drive.
Variable Height Cutting Head for Plunge Cuts
With the variable height cutting head, plunge cuts are made possible. It features a 10” blade capacity, but also accommodates 6” and 8” profile wheels for producing contours. Additionally, the variable height cutting head also allows for blades smaller than 10” to be used, ensuring you have the versatility needed for every application. A 10" MK-225 Hot Dog Blade and JCS stand is included.
Convenient 2-Position Cutting for Easy Cutting of Large & Small Tiles
.
The MK-101 Pro 24 is a wet tile saw that features a built-in water distribution system for keeping the blade cool by supplying both sides of the blade with water. The fully enclosed motor is kept cool by fans. The 3-position motor post and 2-position cutting head makes cutting large and small tiles easy and convenient. The saw cuts tiles up to 24” in length and up to 18” diagonally with depth of cuts up 3-3/4” (with 10” blade).
Rugged & Reliable
Built for durability and safety, the MK-101 Pro 24 Tile Saw is engineered to last. For easy blade removal and inspection there is a blade shaft lock. The saw features a cast aluminum table, blade guard, and motor post supported by a one-piece, reinforced zinc-plated steel frame. The MK-101 Pro 24 Tile Saw is made in the USA and backed by a one-year limited warranty.
Features:
- Micro V-belt drive for maximum transfer of horsepower from motor to blade
- High torque, 1-1/2 HP motor
- Motor is fully enclosed with fans for cooling
- Blade kept cool with built in water distribution system
- Variable height cutting head for plunge cuts
- Capacity for blades smaller than 10”
- Accommodates 6” and 8” profile wheels
- Easily cuts small and large tiles with multi position motor post and cutting head
- Blade easily removed due to the blade shaft lock
- Precise cuts with linear-bearing and chrome plated guide bar assembly
- Cast aluminum blade guard, motor post, and table
- Table features non-slip surface
- One-piece reinforced zinc-plated steel frame
- Made in the USA and backed by a 1 year limited warranty
What's Included
- MK-101 Pro 24 Tile Saw w/ JCS Stand
- 10" MK-225 HotDog Blade
- Water Pump
- Large Rip Guide
- 45° Miter
- 90° Protractor
- Dual 45° Flat Angle Guide
- Dressing Stone
- Side Extension Table
Specifications:
- Motor Electric (Baldor)
- Power 1-1/2 HP, 120V
- Blade RPM 3450
- Blade Capacity 10" (254mm)
- Arbor Size 5/8" (16mm)
- Length of Cut 24"
- Depth of Cut (10" Blade) 3" (76mm)
- Diagonally Cuts 18" tile
- Net Weight 130 lbs (59 kgs)
- LxWxH (inches) 41" x 22" x 23" LxWxH (mm) 1,041 x 559 x 584
- Mk Diamond Part# 153243-JCS
Model
|
Part #
|
Motor RPM
|
Horse
Power
|
Blade Cap.
|
Arbor
|
Depth of Cut
|
Depth of Cut at 45°
|
Rip Cut
|
Diagonal Cut
|
Weight
|
MK-100
|
158189
|
3,450
|
1-1/2
|
10"
|
5/8"
|
3"
|
N/A
|
20"
|
14"
|
96 lbs
|
MK-101 Pro
|
155747
|
3,450
|
1-1/2
|
10"
|
5/8"
|
3"
|
N/A
|
20"
|
14"
|
117 lbs
|
MK-101-Pro 24
|
153243
|
3,450
|
1-1/2
|
10"
|
5/8"
|
3"
|
N/A
|
24"
|
18"
|
130 lbs
|
TX-3
Flooding / Misting
|
164800
166634
|
3,500
|
1-3/4
|
10"
|
1"
|
3-1/2"
|
2-3/8"
|
24"
|
18"
|
85 lbs
|