 |
 |
 |
|
Makita DS4011 1/2" Spade Handle DrillFeatures:
- Industrial quality chuck.
- Heavy-duty 2-stage gearing.
- D handle rotates 360 degrees.
- Weight 6.2 lbs, 6.3 Amps, 550 RPM.
- Ball bearing construction for long tool life and smooth operation.
- Heavy duty industrial 1/2" drill chuck for positive bit retention and accurate drilling.
- Handy chuck key is retained in handle to prevent loss.
- 100% ball & needle bearings.
- Reversible, dust sealed switch.
- Drills to 1/2" in steel.
- 1-3/8" in wood.
- Rocker type switch for easy one-handed forward or reverse operation.
Specifications:
- No load speed: 600 RPM
- Amps (120V): 8.5
- Overall length: 13-3/8"
- Net weight: 6.3lbs.
- Model: DS4011
Includes:
- Drill Chuck
- Chuck Key
- Side Handle
Abaco Dehydrator system is for fast collection and trapping of the
abrasive mud produced by the machining and finishing of marble, granite
and other stone.
The Abaco dehydrator is an economical, one step
method in separating and dewatering sludge treatment, water sludge and
slurries. The dehydrator is constructed of stainless steel and consists
of four basic components: pump, mud holding tank, clean water tray and
filter bags. The Abaco dehydrator has no moving parts, requires minimal
labor, is very economical to use and because it is made of stainless
steel has extremely low maintenance.
Assembling of dehydrator is simple and easy taking approximately 15 minutes. The dehydrator comes with 20 filter bags.Included:
- 4 Plastic curtains.
- 2 Stainless steel curtain rods.
- 1 5m Industrial water hose.
- 3 Industrial hose clamps.
- 20 polypropylene bags.
- 1 Pit cleaning tool/air stick.
- 1 Solid rubber drain plug.
Specifications:
- Dimensions: 2270 x 2220 x 600.
- Weight: 280lbs.
- Power: 240v/50Hz.
- Weekly output capacity (dry mud): 622L.
- Mud holding tank capacity: 550L.
- Sump pump: 6E-CIA-SFS 189 of equivalent.
- Float switch: Piggy back mechanical float switch.
- Bag dimensions: 350 x 1200.
- Construction material: Stainless steel.
- Flange for bag: 350 aluminum.
- Fasteners: Stainless steel.
- Valves: 50mm BSP brass nickel plated.
Click Here: Owners Manual
Abaco Dehydrator system is for fast collection and trapping of the
abrasive mud produced by the machining and finishing of marble, granite
and other stone.
The Abaco dehydrator is an economical, one step
method in separating and dewatering sludge treatment, water sludge and
slurries. The dehydrator is constructed of stainless steel and consists
of four basic components: pump, mud holding tank, clean water tray and
filter bags. The Abaco dehydrator has no moving parts, requires minimal
labor, is very economical to use and because it is made of stainless
steel has extremely low maintenance.
Assembling of dehydrator is simple and easy taking approximately 15 minutes. The dehydrator comes with 20 filter bags.Included:
- 4 Plastic curtains.
- 2 Stainless steel curtain rods.
- 1 5m Industrial water hose.
- 3 Industrial hose clamps.
- 20 polypropylene bags.
- 1 Pit cleaning tool/air stick.
- 1 Solid rubber drain plug.
Specifications:
- Dimensions: 2270 x 2220 x 600.
- Weight: 280lbs.
- Power: 240v/50Hz.
- Weekly output capacity (dry mud): 622L.
- Mud holding tank capacity: 550L.
- Sump pump: 6E-CIA-SFS 189 of equivalent.
- Float switch: Piggy back mechanical float switch.
- Bag dimensions: 350 x 1200.
- Construction material: Stainless steel.
- Flange for bag: 350 aluminum.
- Fasteners: Stainless steel.
- Valves: 50mm BSP brass nickel plated.
Click Here: Parts Breakdown
Abaco Dehydrator system is for fast collection and trapping of the
abrasive mud produced by the machining and finishing of marble, granite
and other stone.
The Abaco dehydrator is an economical, one step
method in separating and dewatering sludge treatment, water sludge and
slurries. The dehydrator is constructed of stainless steel and consists
of four basic components: pump, mud holding tank, clean water tray and
filter bags. The Abaco dehydrator has no moving parts, requires minimal
labor, is very economical to use and because it is made of stainless
steel has extremely low maintenance.
Assembling of dehydrator is simple and easy taking approximately 15 minutes. The dehydrator comes with 20 filter bags.Included:
- 4 Plastic curtains.
- 2 Stainless steel curtain rods.
- 1 5m Industrial water hose.
- 3 Industrial hose clamps.
- 20 polypropylene bags.
- 1 Pit cleaning tool/air stick.
- 1 Solid rubber drain plug.
Specifications:
- Dimensions: 2270 x 2220 x 600.
- Weight: 280lbs.
- Power: 240v/50Hz.
- Weekly output capacity (dry mud): 622L.
- Mud holding tank capacity: 550L.
- Sump pump: 6E-CIA-SFS 189 of equivalent.
- Float switch: Piggy back mechanical float switch.
- Bag dimensions: 350 x 1200.
- Construction material: Stainless steel.
- Flange for bag: 350 aluminum.
- Fasteners: Stainless steel.
- Valves: 50mm BSP brass nickel plated.
|
|
|
 |
|
 |
|