Miracle Sealants Poultice Plus Powder
Miracle Sealants Poultice
Powder is an easy to use fine, non-acidic absorbent powder that is
environmentally safe! It is designed to work with different
cleaners/chemicals to draw out stains from most absorbent surface
- All Tile
- All Natural Stone
- Clay Pavers
- Masonry Surfaces
- Easy to Use
- Fast & Effective
All previous applied sealers, coatings and/or waxes must be removed using Mira Strip or H2O Strip as directed. Mix Poultice Powder Plus with “distilled water” or appropriate chemical to form a peanut butter like paste. The paste should be pliable but not runny.
Apply the paste directly to the stain approximately 1/4" - 1/2" thick. Overlap the stain by approximately 1/4"- 1/2". Cover the paste with plastic wrap and tape the plastic with “non marking” tape to create an airtight seal. Allow the paste to dry completely, approximately 24 - 48 hours.
Remove the plastic wrap and scrap the dried paste from the substrate with a non scratching utensil like a wooden spoon or plastic putty knife or spatula. Rinse off all residue with clean “distilled water”. If the stain is lighter but not completely removed repeat the same procedures.
It may be necessary to use multiple applications to remove some stains. Some stains can be removed more easily by mixing the appropriate chemical with product. Refer to the Miracle Sealants Company Stain Removal Guide for additional information.
Heavy Duty Cleaning: Use Phosphoric Acid Cleaner , GCFR or Liquid Poultice as directed. Light Cleaning: Use Mira Clean #1, Grout Cleaner, Tile & Grout Cleaner, Porcelain & Ceramic Tile Cleaner, Mira Soap or Counter Kleen as directed.
Used as directed, Poultice Powder Plus will clean approximately 5 - 10 square feet per 1-pound container. Coverage will vary depending on density, porosity, texture, surface absorption, weather, time solution is left on the surface and application methods.