Miracle Sealants Tile & Stone Cleaner
*Note: Tile & Stone Cleaner is the new name for Mira Clean #1. New look, same great product!*
Tile & Stone Cleaner is a concentrated cleaner designed for all surfaces. It's strong enough for the professional, yet gentle enough for the do-it-yourself specialist. This non-toxic & gentle formula is easy to use and can handle the most difficult stains.
- Ceramic Tile
- Quarry Tile
- Masonry Surfaces
- All Grout
1) Tile & Stone Cleaner is concentrated and requires dilution. To remove difficult stains such as oil and grease, mix one part or product with 3 parts hot water (cold water can be used but cleaning action will be reduced).
2) Apply with a clean mop or self-feeding floor machine.
3) Allow the solution to stand for 10 minutes while agitating periodically with the appropriate scrub brush. DO NOT allow solution to dry on the surface.
4) Extract all the dirty remains with a wet vacuum system.
5) Rinse the surface thoroughly with hot water and allow to dry. Difficult stains may require a second application. If area is still dirty after the second cleaning use Liquid Poultice, Phosphoric Acid Cleaner , Sulfamic Acid Crystals, Porcelain & Ceramic Tile Cleaner, or GCFR (Grout & Concrete Film Remover) as directed.
For general cleaning, mix one cup Tile & Stone Cleaner with 3 gallons hot water following the same instructions as before. Heavy Duty Cleaning: Use Phosphoric Acid Cleaner , GCFR, and Porcelain & Ceramic Tile Cleaner as directed.
Used as directed it covers 1,000 - 10,000 square feet per gallon (90 - 900 square meters per 3.785 liters).