 |
 |
 |
|
QEP Lash Flat Clips
QEP LASH Tile Leveling Clips allow you to install tile with professional results and save time. You can level, align, space and hold tile in place to prevent lippage as well as ensure a consistent finish and help correct tile bowing. The flat clips, part A of a two part system, grant even grout
lines and align neighboring tile of the same thickness for a level
surface. The wedges, part B, hold the tile at an even height for
lippage-free results (sold separately). The QEP LASH clip and wedge
system is used by professional and DIY installers alike to save time
while providing a level and consistently spaced wall or floor. For quick
and easy removal, clips are designed to break off below the surface of
the tile.
Features
- For use with all floor and wall tiles between 1/4 in. and 7/16 in. thick
- Produces 1/16 in. grout joints and may be used with traditional tile spacers up to 1/4 in.
- Durable polymer construction for a secure hold
- Slots allow mortar to disperse evenly to eliminate potential voids
- Use with thinset mortars applied with a square trowel notch 1/4 in. or larger
- Flat design for use with floor and wall tile installation
- LASH pliers may be used for faster installation
- Flat Clips are for single use only
- Wedges are reusable for your next tile installation job
- 100
clips and 100 wedges yield approximately 24 sq. ft. of coverage for 6
in. by 24 in. tile and 72 sq. ft. of coverage for 18 in. by 18 in. tile
- 300
clips and 300 wedges yield approximately 60 sq. ft. of coverage for 6
in. by 24 in. tile and 200 sq. ft. of coverage for 24 in. by 24 in. tile
- 1,000
clips and 1,000 wedges yield approximately 443 sq. ft. of coverage for
16 in. by 16 in. tile and 1,000 sq. ft. of coverage for 24 in. by 24 in.
tile
- 4,000 clips and 4,000 wedges yield approximately 1,770 sq.
ft. of coverage for 16 in. by 16 in. tile and 4,000 sq. ft. of coverage
for 24 in. by 24 in. tile
|
|
|
 |
|
 |
|