Schluter Kerdi 2" Drain with 4" Grate has been discontinued with limited stock availability.
Click Here: New! Schluter Kerdi-Drain Flange Kit
Schluter-KERDI-DRAIN is a floor drain specifically designed to allow connections to Schluter®-KERDI or other load-bearing, bonded waterproof membranes. The membrane is adhered to the large integrated bonding flange to form a waterproof connection at the top of the drain assembly. KERDI-DRAIN consists of a drain casing and fully adjustable grate assembly or covering support to which tile is applied.
The grate assembly accommodates a wide range of tile thicknesses and allows lateral and tilt adjustment as well. The covering support is placed flush with the top of the bonding flange and can therefore accommodate any thickness tile covering.
The standard KERDI-DRAIN is attached directly to the waste line. The drain casing is available in ABS or PVC. The plastic drain casings feature a fleece-covered bonding flange, and the drain is attached to the pipe using an appropriate solvent cement. The simple connection to standard drain outlets makes KERDI-DRAIN suitable for new construction and renovation.
1. Kerdi Drain - Drain with Integrated Bonding Flange
(Manufacturer Part # KD2/PVC & KD2/ABS)
A. Grate Assembly
B. Height Adjustment Collar
C. Lateral Adjustment Ring
D. ABS or PVC flange
2. 4 Inside and 2 Outside Preformed Waterproofing Corners (Kerdi-Kereck)
3. 1 Kerdi-Seal-PS - Pipe Seal (3/4")
4. 1 Kerdi-Seal-MV - Mixing Valve Seal (4-1/2")
Manufacturer Part # KD2/PVC & KD2/ABS