StoneTech KlenzAll Heavy Duty Stone & Tile Cleaner

StoneTech Professional
$10.15 - $144.61
(4 reviews)
Current Stock:
Adding to cart… The item has been added

StoneTech Klenz All Cleaner

STONETECH KlenzAll Cleaner is the heavy duty strength, alkaline cleaner made to remove the toughest dirt, grease and grime from natural stone, tile, masonry and grout. It cleans, degreases and prepares the surface for resealing, is safe on stone and is low VOC. Available in ready-to-use and concentrate formulas for use on heavily used areas such as countertops, walls or floors. 


StoneTech Klenz All Cleaner is ideal for natural stone such as marble, granite, limestone, travertine, slate & sandstone, ceramic and porcelain tile & grout and masonry & concrete.


Features & Benefits:

  • Powers through stubborn grease & soils
  • Safe on stone, will not etch
  • Professional strength, alkaline formula

Where to Use:

Natural stone such as marble, granite, limestone, travertine, slate & sandstone. Ceramic and porcelain tile & grout. Masonry & concrete.


Available Sizes (and Coverage):

  • 24oz. Sprayer
  • Quart Concentrate: 500-4,000 sq. ft.
  • Gallon Concentrate: 2,000-10,000 sq. ft.
  • 5 Gallon Concentrate: 10,000-50,000 sq. ft.

Directions:

Read entire label before using StoneTech Klenz All Cleaner. Use only as directed. Test in small inconspicuous area to determine required dilution and results. Be sure all surfaces to be cleaned are swept or vacuumed to remove loose debris.

Avoid skin and eye contact with product. Wear protective eyewear, gloves, long sleeves, and long pants while handling concentrate. Ensure work area is well-ventilated during application and until surface is dry. Keep children and pets out of the area during application and drying.

Dilute concentrated cleaner with warm water according to the following mixing chart:

Use

KlenzAll® Cleaner

Warm Water

pH

Heavy duty

1 part

2 parts

11.3

Spray refill

1 part

4 parts

11.0

Light duty

1 part

8 parts

10.7

Acid neutralizer

1 part

32 parts

10.5



1. Apply mixed solution of StoneTech Klenz All Cleaner with a mop, sponge or sprayer. Avoid applying cleaner on unintended surfaces.

2. Lightly rub with a scrub brush or floor machine as needed.

3. Remove solution using a sponge, wet/dry vacuum or damp mop.

4. Rinse area well with clean water.

5. Reseal cleaned area with a DuPont StoneTech Professional sealer.


StoneTech KlenzAll Cleaner Technical Data Sheet

StoneTech KlenzAll Cleaner Ready-to-Use Safety Data Sheet

StoneTech KlenzAll Cleaner Concentrate Safety Data Sheet

30.42350:
ST319-0624-10
30.42300:
ST319-0632-20
30.42400:
ST319-0401-20
30.42310:
ST319-0105-20

Reviews

  • 5
    Cleaner

    Posted by Harley Choate

    Worked great to remove algae and dirt

  • 3
    Klenz All cleaning of slate shower stall

    Posted by Danny Miller

    Product did well, though I would note that I had to use Purple Power to get the soap scum off. Used Mold and Mildew Stain Remover along with this to make sure everything was killed as far as mold and mildew. Finished job with Enhancer Pro Sealer. Looks perfect with 5 coats on the tile and grout.

  • 5
    Served it's purpose

    Posted by Oliver

    Bought this for one purpose: to un-seal a counter. We used a sealer that did not give us the effect we wanted. We used Kleanz All to remove the sealer and then we applied the sealer we wanted to use. Let me just say this, it did its job.

  • 5
    Ordered Klenzall

    Posted by Laurie Levinson

    Intelligent, polite and efficient salesperson! Really a pleasure to do business with you.