The Stone Tech Grout Additive mixes into the grout as a replacement to water. The outcome results in a grout that is sealed and stain resistant as it dries which saves you time on your installation.
Read entire label before using. Use only as directed. Ensure work area is well-ventilated during mixing and until surface is dry. Keep children and pets out of the area until foot traffic resumes.
1. Use StoneTech Stain Protecting Grout Additive instead of water when preparing grout.
2.Prepare grout according to the grout manufacturer’s recommended mixing instructions using a grout trowel or low speed mixer to achieve the appropriate grout consistency.
3. Allow the grout to stand for 10 minutes, re-mix before application.
4. Apply grout in accordance to the grout manufacturer’s recommended application instructions.