Directions:
Read entire label before using. Use
only as directed. Test in small inconspicuous area to determine required
dilution and results. Be sure all surfaces to be cleaned are swept or
vacuumed to remove loose debris. Heavy duty dilution may darken some
surfaces.
StoneTech Restore acid-based cleaner will etch or damage most
marble, limestone and travertine surfaces. Will etch or corrode most
metal surfaces.
Avoid skin and eye contact. Wear protective
eyewear, gloves, long sleeves, and long pants while handling product.
Ensure work area is well-ventilated during application and until surface
is dry. Keep children and pets out of the area during application and
drying.
Dilute concentrated cleaner with warm water according to the
following mixing chart:
|
Use
|
Restore™ Acidic Cleaner
|
Warm Water
|
pH
|
|
Heavy duty
|
1 part
|
1 part
|
<1
|
|
Spray refill
|
1 part
|
4 parts
|
1.6
|
|
Light duty
|
1 part
|
16 parts
|
2.8
|
1. Apply mixed solution with a clean mop, towel, sponge or sprayer.
Avoid applying cleaner on unintended surfaces.
2. Lightly rub with a
scrub brush or floor machine as needed.
3. Remove solution using a
sponge, wet/dry vacuum or damp mop.
4. Rinse area well with clean
water and wipe dry. Thoroughly rinse all metal surfaces with clean
water.
5. Reseal cleaned area with a DuPont™ StoneTech® Professional
sealer.
Available Sizes (and Coverage):
24 oz. Sprayer
Quart Concentrate: 500-2,500 sq. ft.
Gallon Concentrate:
2,000-8,000 sq. ft.
5 Gallon Concentrate: 10,000-40,000 sq. ft.
55 Gallon Concentrate: 110,000-440,000 sq. ft.
Material Safety Data Sheet
Stone tech professional restore 
