StoneTech Restore Acidic Cleaner (Concentrate)
NOTE: StoneTech Professional is now distributed by Laticrete International. Same great Dupont formula, but now with a Laticrete Label.
StoneTech Professional Restore Acidic Cleaner is ideal for renewing your tile & grout. This professional strength formula cleans away hard water deposits, grout haze, efflorescence & soap scum. This heavy duty cleaner is carefully designed for stone.
StoneTech Restore Acidic Cleaner won't break down the sealers and damage stone surfaces, providing you with peace of mind! It's great for use on ceramic tile, porcelain tile & grout, granite, slate & sandstone.
Features and Benefits:
- Renews tile & grout
- Cleans away hard water deposits, grout haze, efflorescence & soap scum
- Professional strength, acidic formula
Where to Use:
Ceramic tile, porcelain tile & grout, granite, slate & sandstone.
Available Sizes (and Coverage):
- Quart Concentrate: 500-2,500 sq. ft.
- Gallon Concentrate: 2,000-8,000 sq. ft.
- 5 Gallon Concentrate: 10,000-40,000 sq. ft.
Directions:
Read entire label before using. Use only as directed. Test in small inconspicuous area to determine required dilution and results. Be sure all surfaces to be cleaned are swept or vacuumed to remove loose debris. Heavy duty dilution may darken some surfaces.
StoneTech Restore acid-based cleaner will etch or damage most marble, limestone and travertine surfaces. Will etch or corrode most metal surfaces.
Avoid skin and eye contact. Wear protective eyewear, gloves, long sleeves, and long pants while handling product. Ensure work area is well-ventilated during application and until surface is dry. Keep children and pets out of the area during application and drying.
Dilute concentrated cleaner with warm water according to the following mixing chart:
|
Use
|
Restore™ Acidic Cleaner
|
Warm Water
|
pH
|
|
Heavy duty
|
1 part
|
1 part
|
<1
|
|
Light duty
|
1 part
|
16 parts
|
2.8
|
1. Apply mixed solution with a clean mop, towel, sponge or sprayer. Avoid applying cleaner on unintended surfaces.
2. Lightly rub with a scrub brush or floor machine as needed.
3. Remove solution using a sponge, wet/dry vacuum or damp mop.
4. Rinse area well with clean water and wipe dry. Thoroughly rinse all metal surfaces with clean water.
5. Reseal cleaned area with a DuPont StoneTech Professional sealer.
StoneTech Restore Acidic Cleaner Technical Data Sheet
StoneTech Restore Acidic Cleaner Safety Data Sheet