Home > Setting Materials > Underlayments >

Tamko TW Moisture Wrap
Tamko TW Moisture Wrap


 
Price: $25.95


Product Code: 40-10145


Dimensions*:


Qty:  
Description
 
Tamko TW Moisture Wrap is a flexible 40 mil self-adhering rubberized asphalt sheet membrane with a clear polymer film on the surface film and a removable treated release film on the adhesive side.

Uses:
Tamko TW Moisture Wrap is designed for use as an above grade moisture / air barrier and is suitable for application in cavity wall construction, sealing window and door perimeters, sealing of wall joints, corners, and other terminations. TW Moisture Wrap is suitable for application to concrete, block, exterior gypsum sheathing or wood surfaces. Tamko TW Moisture Wrap may be applied horizontally, and may also be installed vertically when applied over the full surface area.

Advantages:
  • Flexible SBS modifi ed asphalt and polymer fi lm surfacing provides excellent protection from moisture or air penetration.
  • Treated release fi lm for easier installation and handling.
  • High temperature resistance up to 245°F.
  • Adheres to cast-in-place concrete, pre-cast concrete, concrete masonry block, exterior gypsum sheathing, plywood, OSB, DensGlass®, DensGlass Gold®, EPS insulation, felt and foil-faced polyisocyanurate foam insulation, wood, vinyl or metal surfaces.
  • Available in factory pre-cut widths of 4", 6", 9", 12", 18", 24", 36" and 39-3/8" rolls.
  • Individually wrapped factory pre-cut widths with point-of-purchase (POP) labels are available in 4", 6" and 9" roll sizes.
  • ICC-ES ESR-2260.
Limitations:
  • Membrane or primer must not be applied to damp, frosty or contaminated surfaces.
  • Membrane must not be left exposed to sunlight for more than 30 days. For applications requiring longer exposure before covering, use TW Window & Door Flash, TW Flash-N-Wrap® 25, or TW Flash-N-Wrap® 40. Tamko recommends covering this material as soon as possible for ultimate product performance as severe weather to exposed product may affect performance.
  • Membrane must not come into contact with products containing coal-tar pitch.
  • Membrane must be applied when air, substrate and membrane temperatures are above 40° F.
  • Not designed for use in ponding areas.

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

Setting Materials > Underlayments
Setting Materials