Tenax Ager Color Enhancer Sealer - Quart

WET LOOK NATURAL STONE SEALER & ENHANCER.

Tenax Ager is a stone enhancer and sealer that revitalize and enhances the color of natural stone surfaces. Use the 1 Quart ager on your natural stone surfaces to give the stone a deep, rich appearance and protect the pores from absorbing potentially discoloring liquids that could stain the surface

Tenax Ager is a solvent based product That performs two main functions on natural stone surfaces. First, it protects all sorts of natural stone materials from absorbing liquids that could mar the appearance of the stone. Second, Ager enhances the natural color and grain of the material to which it is applied. Additionally, Tenax Ager helps protect natural stone against graffiti.

How to Apply
Using a paintbrush, cloth, fleece, or sponge applicator, apply Tenax Ager undiluted to a completely clean and dry natural stone surface. Allow the material to naturally absorb the Ager evenly. Within a few seconds of application, wipe off any Ager that was not absorbed into the natural stone material using a clean cloth or sponge.

Avoid applying Ager in direct sunlight. Wait 24 hours after treatment for finished surface. In the case of treating natural stone surfaces that receive foot traffic, do not walk on treated surface for 4-6 hours after treatment.

Benefits of Ager
Adding Ager to natural stone surfaces produces benefits and adds beauty to the stone. The following list enumerates some of the benefits of applying Ager to natural surfaces:

UV Resistant
Non Yellowing
Stain Resistant
Enhances Color Tone
Helps Protects Against Graffiti

Material Compatibility
Tenax Ager is a color and grain enhancer and sealer designed for adding beauty to all sorts of natural stone surfaces including the following materials:

Marble
Granite
Limestone
Sandstone
Quartzite
Travertine
Agglomerate
Rosso Verona

WARNING: Tenax Ager does not provide anti-etch protection on marble surfaces. Use of acidic substances such as wine, tomatoes, citrus, coffee, etc. will etch the surface by creating a chemical reaction with eh calcium carbonate present in marbles. For etching problems use Tenax TeEtch.

Technical Information

Density at 25°C gr/cm2: 0.95
Appearance: Opalescent Liquid
Color: Colorless

Size

1 Quart

Approximate Coverage per 1 Quart
The consumption greatly depends on the porosity of the material being treated. Each type of natural stone varies in porosity. Additionally, stones vary in porosity even if they are the same type. The following list gives some general coverage guidelines for some stone.

Tenax Ager Color Enhancer Sealer
Material	Approximate Coverage per Quart
Honed Stone & Marble	203 - 356 sq.ft.
Polished Marble & Granite	305 - 509 sq.ft.