 |
Tenax Eliox Knife Grade Epoxy- Part A & B
Tenax Eliox is an extra clear bi-component epoxy knife grade glue approved for food contact. Suitable to fill, glue and laminate marble, stone, granite, quartz and ceramic. Can be used indoor and outdoor with low yellowing. This product is extra clear, soft and light, easy to spread and with a high gloss and brightness.
In compliance with Legislative Decree no. 29/2017 the mastic is approved for food contact*.
The mastic has low smell and also present low risk phrases, no toxic to long term, for the health of the final user.
ELIOX has also LOW content of VOC.
Features
- Excellent adhesion
- Very low shrinkage during the hardening processing
- Easy to color
- Soft and easy to apply
- Very bright and easy to polish
- Dripless and does not sag
- Resistant to temperature
- Indoor/Outdoor
- Extra strong
- Transparent
- Extra clear
- Very low yellowing
- Very easy dosing
- Food contact approved
What's Included
- Part A - 1.5 kg
- Part B - 0.75 kg
Technical Data
|
Viscosity part A / part B cps 25°C :
|
Tixotropic paste / Tixotropic paste
|
|
Density part A / part B at 25°C gr/cm³ :
|
1.1 / 1.0
|
|
Mixing Ratio hardener :
|
100+50
|
|
Ratio of use glue/hardener:
|
100+2/3
|
|
Gel time in bulk at 25°C :
|
10-15 min
|
|
Tacky free in thin layer at 25° C in min :
|
Approx. 3h – 3h 30min
|
|
Working time suggested at 25°c in min:
|
Approx. 60-70 min
|
|
Hardeness in Shore D ASTM D 2240 :
|
80
|
|
Minimum temperature of use after hardening:
|
0°C
|
|
Yellowing test in climatic chamber Qsun,
(ASTM D904), 1 year of outdoor conditions,
light + rain+ thermal shock :
|
Low
|
|
Minimum reaction temperature :
|
+10°C
|
|
Minimum temperature of use after hardening :
|
-25°C
|
|
Maximum temperature of use after hardening :
|
+60°C
|
|
Working time at 25°C (time for polishing or
cutting) :
|
24 hours
|
|
Adhesion on marble after 8h :
|
11 MPa
|
|
Adhesion on marble after 24h :
|
12 MPa
|
|
Adhesion on quartz after 8h :
|
13 MPa
|
|
Adhesion on quartz after 24h :
|
13 MPa
|
|
Adhesion on ceramic after 8h :
|
16 MPa
|
|
Adhesion on ceramic after 24h :
|
17 MPa
|
Tenax Eliox Knife Grade Epoxy, Part A & B Technical Data Sheet
Tenax Eliox Knife Grade Epoxy, Part A Safety Data Sheet
Tenax Eliox Knife Grade Epoxy, Part B Safety Data Sheet
|
|
|
Great Item!!! 
