|
|
|
|
|
|
|
|
|
|
|
|
|
|
Schluter-DITRA is a polyethylene membrane with a grid structure of square cavities, each cut back in a dovetail configuration, and an anchoring fleece laminated to its underside.
|
Laticrete Hydro Ban is a thin, load bearing waterproofing/crack isolation membrane that DOES NOT require the use of fabric in the field, coves or corners.
|
Schluter®-KERDI is a pliable, sheet-applied, bonded waterproof membrane and vapor retarder with limited crack-bridging capabilities. Now with printed grid lines.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
AFM-WM is a 40 mil peel-and-stick crack isolation sheet waterproofing membrane for use beneath thin-set tile and stone applications.
|
Laticrete 9235 Waterproofing Membrane is a thin, load-bearing waterproofing designed specifically for the special requirements of ceramic tile, stone and brick installations.
|
This Vinyl Shower Pan Liner protects a full mortar bed ceramic tile shower stall from leakage.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Oatey Bonding Adhesive X-15 is formulated for bonding or seaming PVC shower pan liners to itself.
|
Laticrete 9235 Waterproofing Membrane is a thin, load-bearing waterproofing designed specifically for the special requirements of ceramic tile, stone and brick installations.
|
Noblesealant is a waterproofing Sealant for seaming and sealing sheets of Chloraloy and NobleSeal.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Noble Chloraloy is a premium liner for waterproofing your shower. Unlike standard PVC liners, chloraloy is guaranteed to last a lifetime. It is designed to be used under full mortar bed installations of tile and stone.
|
Preformed Corner to protect show pan waterproofing from leaks at thresholds and/or for right angles. Made from Chlorinated
Polyethylene.
|
NobleSeal TS is a single sheet membrane that provides waterproofing and crack isolation/joint bridging for thin-set installations of ceramic and stone tile.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
To be used with NobleFlex Drain Flashing and NobleSeal TS Membrane.
|
Laticrete Hydro Ban is ideal for a variety of applications that require waterproofing.
|
Laticrete Hydro Ban is ideal for a variety of applications that require waterproofing.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Noble ValueSeal is Noble's NEWEST, ultra-thin, cost-effective sheet membrane for interior waterproofing of floors and walls.
|
Hydro Ban Sheet Membrane is a waterproof sheet membrane that is installed using a substrate appropriate Laticrete thin-set.
|
RedGard is a ready-to-use, elastomeric, waterproofing and anti-fracture membrane for commercial and residential tile and stone installations.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The Laticrete Waterproof Membrane Fabric is ideal for expansion joints and cracks exceeding 1/8" or more.
|
Use KERDI-BAND, in widths of 5" (12.5 cm), 7-1/4" (18.5 cm), or 10" (25 cm) to seal butt joints or corner joints.
|
Schluter-DITRA-XL serves as an uncoupling layer, waterproofing membrane, and vapor management layer that accommodates moisture from beneath the tile covering.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
KERDI-FLEX, in 5" (12.5 cm) or 10" (25 cm) widths, is used to seal expansion joints or flexible edge joints.
|
Schluter-KERDI-KERECK are preformed, seamless corners made of Schluter-KERDI for waterproofing inside and outside corners.
|
Schluter®-KERDI-FIX is a single component, waterproof sealing and bonding compound with a silane-modified polymer base.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The USG DUROCK Shower System preformed inside corners utilize state of the art materials to create waterproofing inside corners for use in fully bonded waterproof shower construction.
|
Custom RedGard SpeedCoat is a ready-to-use, waterproofing membrane for
both commercial and residential ceramic and natural stone tile
installations.
|
Laticrete HYDRO BAN Cementitious Waterproofing Membrane is a one
component, polymer fortified, cement based waterproofing material
that mixes with water.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
These preformed corners are ultra thin, flexible, and easy to install. Seals to protect against leaks in wet areas.
|
ARDEX S1-K One-Component Waterproofing/Crack Isolation Membrane is an easy to use compound that makes a flexible, positive-side waterproof coating.
|
ARDEX SK Mesh premium, non-woven, polyester mesh reinforcement fabric is used for reinforcement of ARDEX 8+9 Rapid Waterproofing and Crack Isolation Compound in changes of plane, changes of material, corners and crack isolation.
|
|
|
