Schluter-DITRA is a polyethylene membrane with a grid structure of square cavities, each cut back in a dovetail configuration, and an anchoring fleece laminated to its underside.
Laticrete Hydro Ban is a thin, load bearing waterproofing/crack isolation membrane that DOES NOT require the use of fabric in the field, coves or corners.
Schluter®-KERDI is a pliable, sheet-applied, bonded waterproof membrane and vapor retarder with limited crack-bridging capabilities. Now with printed grid lines.
AFM-WM is a 40 mil peel-and-stick crack isolation sheet waterproofing membrane for use beneath thin-set tile and stone applications.
Laticrete 9235 Waterproofing Membrane is a thin, load-bearing waterproofing designed specifically for the special requirements of ceramic tile, stone and brick installations.
This Vinyl Shower Pan Liner protects a full mortar bed ceramic tile shower stall from leakage.
Oatey Bonding Adhesive X-15 is formulated for bonding or seaming PVC shower pan liners to itself.
Noblesealant is a waterproofing Sealant for seaming and sealing sheets of Chloraloy and NobleSeal.
Noble Chloraloy is a premium liner for waterproofing your shower. Unlike standard PVC liners, chloraloy is guaranteed to last a lifetime. It is designed to be used under full mortar bed installations of tile and stone.
Preformed Corner to protect show pan waterproofing from leaks at thresholds and/or for right angles. Made from Chlorinated Polyethylene.
NobleSeal TS is a single sheet membrane that provides waterproofing and crack isolation/joint bridging for thin-set installations of ceramic and stone tile.
To be used with NobleFlex Drain Flashing and NobleSeal TS Membrane.
Laticrete Hydro Ban is ideal for a variety of applications that require waterproofing.
Noble ValueSeal is Noble's NEWEST, ultra-thin, cost-effective sheet membrane for interior waterproofing of floors and walls.
Hydro Ban Sheet Membrane is a waterproof sheet membrane that is installed using a substrate appropriate Laticrete thin-set.
RedGard is a ready-to-use, elastomeric, waterproofing and anti-fracture membrane for commercial and residential tile and stone installations.
The Laticrete Waterproof Membrane Fabric is ideal for expansion joints and cracks exceeding 1/8" or more.
Use KERDI-BAND, in widths of 5" (12.5 cm), 7-1/4" (18.5 cm), or 10" (25 cm) to seal butt joints or corner joints.
Schluter-DITRA-XL serves as an uncoupling layer, waterproofing membrane, and vapor management layer that accommodates moisture from beneath the tile covering.
KERDI-FLEX, in 5" (12.5 cm) or 10" (25 cm) widths, is used to seal expansion joints or flexible edge joints.
Schluter-KERDI-KERECK are preformed, seamless corners made of Schluter-KERDI for waterproofing inside and outside corners.
Schluter®-KERDI-FIX is a single component, waterproof sealing and bonding compound with a silane-modified polymer base.
The USG DUROCK Shower System preformed inside corners utilize state of the art materials to create waterproofing inside corners for use in fully bonded waterproof shower construction.
Custom RedGard SpeedCoat is a ready-to-use, waterproofing membrane forboth commercial and residential ceramic and natural stone tileinstallations.
Laticrete HYDRO BAN Cementitious Waterproofing Membrane is a one
component, polymer fortified, cement based waterproofing material
that mixes with water.
These preformed corners are ultra thin, flexible, and easy to install. Seals to protect against leaks in wet areas.
ARDEX S1-K One-Component Waterproofing/Crack Isolation Membrane is an easy to use compound that makes a flexible, positive-side waterproof coating.
ARDEX SK Mesh premium, non-woven, polyester mesh reinforcement fabric is used for reinforcement of ARDEX 8+9 Rapid Waterproofing and Crack Isolation Compound in changes of plane, changes of material, corners and crack isolation.
Back to top