Custom T1-60 Economical Tile Adhesive
Custom Multi-Surface Bonding Primer (MBP)-

Price: $52.08

Manufacturer Part #: T1603

Product Code: 40.51100


Custom T1­-60 Economical Tile Adhesive - 3.5 gallon

Offers economical and durable bonds for most wall, floor and countertop installations of ceramic tile. Offers superior adhesion and easy clean-up. Meets ANSI A136.1 Type I requirements for organic adhesives.

Recommended for tile up to 8" (20 cm) on any one side. Can be used with wall or countertop tile up to 15" (38 cm) but dry time significantly increases. For any tile with one or more sides greater than 15" (38 cm) CUSTOM recommends using a polymer modified thinset mortar for setting large format tile. Call Technical Services for more information at 800-282-8786.


  • For basic floor and wall tile installations
  • Easy to clean-up
  • Ideal for small format tile

Suitable Tile Types
Vitreous, semi-vitreous or non-vitreous tile: ceramic impervious porcelain, mosaic, quarry tile, slate and natural stone

Suitable Substrates
  • Concrete, mortar beds, masonry, Portland cement plaster
  • WonderBoard® Lite, cement backerboards
  • Exterior Grade Plywood (EGP) interior residential and light commercial dry areas
  • Gypsum wallboard (interior dry areas)
  • Existing ceramic tile
  • Fully-bonded sheet vinyl flooring
  • Plastic laminates
  • Cutback adhesive (see preparation instructions)

  • 3.5 Gallon

Custom T1­-60 Economical Tile Adhesive

Trowel Size Min Coverage Max Coverage
3/16" x 5/32" V-notch for tile up to 6" on any one side 40 sq. ft 60 sq. ft
1/4" x 1/4" x 1/4" Sq notch for tiles up to 12" on any one side 15 sq. ft. 175 sq. ft.
1/4" x 3/8" x 1/4" Sq notch for tiles up to 15" on any one side 10 sq. ft. 14 sq. ft.

Custom T1­-60 Economical Tile Adhesive Technical Data Sheet

Custom T1­-60 Economical Tile Adhesive Safety Data Sheet

Share your knowledge of this product with other customers... Be the first to write a review