The patented Omni Cubed No-Spin Edger is an inexpensive solution for eliminating vertical surface damage during polishing and refinishing. Sale price good through 12/31.

The patented Omni Cubed No-Spin Edger is an inexpensive solution for eliminating vertical surface damage during polishing and refinishing. Sale price good through 12/31.

The patented Omni Cubed No-Spin Edger is an inexpensive solution for eliminating vertical surface damage during polishing and refinishing. Sale price good through 12/31.

The Omni Cubed ALL-NEW 90° Stealth Seamer™, Auto is the most versatile tool on the market for creating high-quality perpendicular seams without the hassle of straps or bar-clamps. Sale price good through 12/31.

The ALL-NEW 90° Stealth Seamer™, Manual is the ideal solution for consistently creating high-quality perpendicular seams such as mitered aprons, butt-joints, and compound corners. Sale price good through 12/31.

Aqua-Jaws are the highest capacity carry clamps on the market, accommodating up to 800 pounds per pair. Sale price good through 12/31.

The Aqua-Jaw™ Handle Kit accessory adds two more handles to each unit, enabling four people to share the load. One set includes four handles—enough for two vises. Sale price good through 12/31.

Minimize dust exposure by connecting a dust shroud to your variable-speed hand polisher. The Dust Shroud Polisher Adapter is an easier, more economical alternative to large dry polishing equipment. Sale price good through 12/31.

Minimize dust exposure by connecting a dust shroud to your variable-speed hand polisher. The Dust Shroud Polisher Adapter is an easier, more economical alternative to large dry polishing equipment. Sale price good through 12/31.

Minimize dust exposure by connecting a dust shroud to your variable-speed hand polisher. The Dust Shroud Polisher Adapter is an easier, more economical alternative to large dry polishing equipment. Sale price good through 12/31.

The Omni Cubed Edge Seamer helps take the twist out of sink rails and cutouts, and dial-in flawless seams along material edges. Sale price good through 12/31.

The Lam-Clamp™ has revolutionized countertop edge laminations by exceeding traditional methods in efficiency, seam quality, and durability. Sale price good through 12/31.

One complete clamp assembly for any model Lam-Clamp. Sale price good through 12/31.

The Low-Profile Bumper accessory for the No-Spin Edger protects faucet fixtures and other lower-profile vertical surfaces from the edge of spinning pads during polishing or refinishing. Sale price good through 12/31.

The Mega-Jaw™ is a quick and easy, gravity-assisted carry clamp. The clamps distribute weight to both arms, reducing strain and enabling safer, more ergonomic carrying of stone. Sale price good through 12/31.

The single Miter-It™ Auto clamp allows the expansion of any Miter-It™ Auto system (Electric, Pneumatic, or Starter Kit). Sale price good through 12/31.

The Miter-It™ Auto, Electric system enables vacuum-powered mitered laminations “on the go”. Sale price good through 12/31.

The Miter-It™ Auto, Pneumatic system saves time and money on performing miter laminations in the shop by eliminating the need for a helper—wherever you would need a hand to hold the material, put a Miter-It™ Auto clamp there instead! Sale price good through 12/31.

The Miter-It™ is an easy-to-use jig that allows finished-side-up miter laminations. Sale price good through 12/31.

The Miter-It™ is an easy-to-use jig that allows finished-side-up miter laminations.Sale price good through 12/31.

The Omni Cubed ALL-NEW Nano Auto Stealth Seamer™ joins and levels countertops to consistently create high-quality, even seams with more control and less effort than traditional methods. Sale price good through 12/31.

The ALL-NEW Omni Cubed Nano Manual Stealth Seamer™ joins and levels countertops to consistently create high-quality, even seams with more control and less effort than traditional methods. Sale price good through 12/31.

The Omni Cubed Pro Stealth Seamer™, Auto is the key to completing a “seamless” installation.Sale price good through 12/31.

The Omni Cubed Pro Stealth Seamer™, Auto is the key to completing a “seamless” installation. It joins, levels, and actually flattens warped stone to help you consistently produce virtually invisible seams. Sale price good through 12/31.

The Pro-Anchor™ T-31 Anchor Machine easily and precisely cuts curved T-slots in stone for bottom-mount sinks and architectural facings. Sale price good through 12/31.

The Pro-Anchor™ T-31 Anchor Machine easily and precisely cuts curved T-slots in stone for bottom-mount sinks and architectural facings. Sale price good through 12/31.

The Pro-Cart AT1 Folding Kit is an upgrade accessory that allows the cart casters to be rotated under the main support rail, allowing for even easier storage (reduces cart width to less than 10” wide). Sale price good through 12/31.

The Pro-Cart AT1 is designed to overcome the challenges of moving stone over curbs, stairs, and other rough terrain such as gravel or lawns. The cart easily and safely transports large and cumbersome stone, reducing the physical burden on workers. Sale price good through 12/31.

The Omni Cubed Pro-Cart AT2 is designed to overcome the challenges of moving stone over curbs, stairs, and other rough terrain such as gravel or lawns. The cart easily and safely transports very large and cumbersome stone, reducing the physical burden on workers.Sale price good through 12/31.

The Multi-Top Accessory enables transportation of multiple countertops simultaneously on Omni Cubed Pro-Carts. Each set includes two upright support rails (two used per cart). Sale price good through 12/31.

The Pro-Dolly™ HD1 allows easier transport and installation of countertops. An aluminum frame makes this dolly extremely compact and lightweight at only 21 pounds, yet strong enough to accommodate a 750 lb load.Sale price good through 12/31.

The Pro-Dolly™ HD2 allows easier transport and installation of countertops. An aluminum frame makes this dolly extremely compact and lightweight, only 35 pounds, yet strong enough to accommodate a half-ton load.Sale price good through 12/31.

The Sink Hole Saver™ Angle Bracket connects two Sink Hole Savers to create a rigid joint at any angle up to 270° for safe transportation of uniquely shaped countertops. Sale price good through 12/31.

The NEW Sink Hole Saver™ Auto is a surface-mounted, vacuum-pump powered reinforcement system that strengthens fragile materials during lifting, transportation, and installation. Sale price good through 12/31.

The NEW Sink Hole Saver™ Cup Assembly features a proprietary, non-marking vacuum cup with triple sealing rings for a strong, reliable hold—even on textured and leathered surfaces. Sale price good through 12/31.

The NEW Sink Hole Saver™ Edge is the perfect solution for protecting cutouts, backsplashes, and other fragile pieces during fabrication, transportation, and installation. Sale price good through 12/31.

The NEW Sink Hole Saver™ Edge Clamp Assembly has a wider clamping range, enhanced tightening knobs, and new rubber bumper guards to protect finished edges. Sale price good through 12/31.

The NEW Sink Hole Saver™ Manual is a surface-mounted reinforcement system that strengthens fragile materials during lifting, transportation, and installation. Sale price good through 12/31.

The Sink Hole Saver™ Slider is an adjustable-length, surface-mounted reinforcement device that offers exceptional versatility and convenience. Sale price good through 12/31.

The Pro-Lift Automatic provides a safer means of stone transportation and installation.

The NEW Rechargeable Power Pack features a 12V Li-ion battery that lasts up to 5 hours on a single charge, and has an LCD display showing the remaining power level, so you never have to wonder if your battery will last through another install.

The Rigid Cross-Brace Kit attaches to any two Omni Cubed® vacuum cup Sink Hole Savers, forming a sturdy support frame for large format slabs and tiles, large islands, or fragile cutouts such as tub decks.

The NEW Sink Hole Saver™ Extension Bracket Kit combines two Sink Hole Saver™ Manuals into one adjustable-length rail for greater versatility and convenience.

The NEW Sink Hole Saver™ Pump Kit features a more durable, compact vacuum pump with a greater airflow rate than previous models.

The Sink Hole Saver™ Vertical Lifting Handle Kit attaches to vacuum cup Sink Hole Savers to make vertical panel installations safer, faster, and easier.

The Stealth Grip™ is a non-marking vacuum cup that provides a reliable and convenient hand-hold on flat surfaces such as stone, tiles, and glass.

The Vacuum Manifold Kit converts a Miter-It Auto™, Pneumatic or Starter Kit, into an electric system that can be used “on the go” at any jobsite when connected to Omni Cubed’s electric vacuum pump (VMP600-KIT, sold separately).

The Vacuum Pump Kit is compatible with all Omni Cubed seam setters, and can be used to equip previous models with the latest pump technology.

The highly efficient Venturi Vacuum Generator Kit provides a continuously strong and reliable hold for up to 10 vacuum cups simultaneously.

The Horizontal Lifting Handle Kit provides a comfortable gripping point beyond both ends of any one Sink Hole Saver™ rail or Rigid Cross-Brace bar during lifting, moving, and tilting large format porcelain tiles or other materials.